• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Trick flow Track heat kit?

  • Thread starter Thread starter MY 85 GT
  • Start date Start date Mar 9, 2010

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Mar 9, 2010
#1
  • Mar 9, 2010
  • #1
Ok i started a post but no-one said much i'll try this who is running a TFS track heat kit...H/C/I i want to purchase this and use my Paxton SN93 blower making 6-8 psi what type of RWHP will i make...im using 42lb injectors,255 lph gss340 fuel pump,Aboco DBX 97 mm maf...I was told tho the Cam wouldnt be so good for my car since its an Auto...i was told to go with a Comp blower cam?,,any ideas on what cam is good from comp?...
 

Cobra912

Active Member
May 1, 2005
1,777
11
39
Wish I was anywhere but here
Mar 9, 2010
#2
  • Mar 9, 2010
  • #2
I think it's the stage 1 cam? not too bad for your set-up, the package would work nice with a mild blower.

I would say as a guess 360-370 as a guess?? I made 449 to the wheels with a built 331 and 7lbs on a Paxton 1220SL.

A comp cam XE blower series cam like a XE274HR would probably work nice depending on heads and pistons etc.
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,255
204
South Jersey
Mar 9, 2010
#3
  • Mar 9, 2010
  • #3
Trick flow Street Heat kit, Stock bottom end, vortech Si trim stock pulleys, c/4 w/ trans brake, 3.73's , 275/50/15 m/t drag radials. best pass of 10.90 @ 130 w/ 11.0 A/f and 20 degrees total timing. Not sure on the rwhp because we never took it to the dyno, we just tuned it on the street w/ a wide band and pms. so in other words, that should be a potent combo.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Mar 10, 2010
#4
  • Mar 10, 2010
  • #4
Thanks guys...The shop doing my work said i should use the Track heat and go with a blower cam made by Comp do you think thats a good set-up?...I want this car to be in the 12's somewhere do i have a shot?...its an 87 vert with a worked AOD 3.73's...
 
S

SVTFreak

Member
Jan 11, 2006
106
6
18
Mar 10, 2010
#5
  • Mar 10, 2010
  • #5
What could be expected from a track heat top end kit on a 347 with 10.5:1 pistons?
 

Cobra912

Active Member
May 1, 2005
1,777
11
39
Wish I was anywhere but here
Mar 10, 2010
#6
  • Mar 10, 2010
  • #6
84t-top said:
Trick flow Street Heat kit, Stock bottom end, vortech Si trim stock pulleys, c/4 w/ trans brake, 3.73's , 275/50/15 m/t drag radials. best pass of 10.90 @ 130 w/ 11.0 A/f and 20 degrees total timing. Not sure on the rwhp because we never took it to the dyno, we just tuned it on the street w/ a wide band and pms. so in other words, that should be a potent combo.
Click to expand...

wow I suck . Like I said I made 449 to the wheels on slicks (with a stock t-5) and drove it like I stole it and could only muster a 11.4 @ 122mph. Good time!

I grenaded my t-5 shortly there after so I'm installing a new C4 this weekend.
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,255
204
South Jersey
Mar 10, 2010
#7
  • Mar 10, 2010
  • #7
Our car w/ out the blower and aod was only able to muster a 13.0 in its defense the convertor was really tight, but a 12 second pass is not asking too much w/ that combo.

Thanks cobra912
 

Tanus

New Member
Dec 11, 2009
847
1
0
A to the Z
Mar 10, 2010
#8
  • Mar 10, 2010
  • #8
should easily run a 12 even without the blower, but then again not sure how much the automatic plus extra weight of vert is costing. definatly be deep in 12s with a 5-speed coupe. my car with the holley kit runs low 12s at 110. and I think the TF kit makes more HP.
 

Tanus

New Member
Dec 11, 2009
847
1
0
A to the Z
Mar 10, 2010
#9
  • Mar 10, 2010
  • #9
SVTFreak said:
What could be expected from a track heat top end kit on a 347 with 10.5:1 pistons?
Click to expand...
Id guess like 375rwhp and deep 11s
 
S

SVTFreak

Member
Jan 11, 2006
106
6
18
Mar 11, 2010
#10
  • Mar 11, 2010
  • #10
Tanus said:
Id guess like 375rwhp and deep 11s
Click to expand...

Tanks!
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
12K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
L
Whats a safe limits to take this engine to?
  • LCATGA
  • Sep 3, 2024
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
4
Views
812
2005 - 2014 S-197 Mustang -General/Talk- Sep 5, 2024
89ripper
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
492
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
C
Fuel pressure help
  • clayton seiders
  • Aug 31, 2024
  • 1994 - 1995 Specific Tech
Replies
12
Views
1K
1994 - 1995 Specific Tech Sep 1, 2024
clayton seiders
C
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?