Trickflow Intakes

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Me and my buddy are building a 331 stroker motor. Heads and cam car as well. Now what intake do you guys think we should put on it? It is between the Trickflow StreetHeat or TrackHeat. What do you guys think will be better for horse power and torque? I am thinking the TrackHeat. Thanks for your responce.
 
:OT:

Rick, the rear is back in and done. All is well except for a slight hum/howl on decel. We are going to re shim the carrier and recheck backlash tomorrow. Other than that, its fine. I just need to check and set the pinion angle. The over all difference isn't all that huge in terms of around town driving. Very streetable gear IMO. Hopefully we can fix the decel hum tomorrow. I did a WOT 1st gear roll and it was all over the road 1st and 2nd :)

Quick question, does the car have to be perfectly level to do the pinion angle? I ordered a 3" mid pipe too.