• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Trunk rust project with PICS

  • Thread starter Thread starter wild70stang
  • Start date Start date Mar 19, 2006

wild70stang

New Member
Nov 11, 2005
317
0
0
Mar 19, 2006
#1
  • Mar 19, 2006
  • #1
I decided to get rid of most of the rust in my trunk since I just got paid. I bought some of eastwoods rust encapsulator and some rust dissolvent. I used a non scratching surface steel wool pad to clean most of the spackel or some wierd bondo/paint like crap that covers the inside of the rear fenders inside the trunk. I cleaned a small area and applied the rust encapsulator just to see how this stuff would work out. The pics below show the bare metal(and surrounding crappy paint stuff with rust in some areas) and the other shows the encapsulator paint. I'll post more pics when im done

http://www.s3.exoload.com/uploads/306/1142808141.jpg

http://www.s3.exoload.com/uploads/306/1142801326.jpg
 

Attachments

  • 1.webp
    18.7 KB · Views: 256
  • 2.webp
    31 KB · Views: 226
M

mustangdave

My rearend needs a stud and two nuts.
Founding Member
Feb 26, 2002
2,976
1
56
North Carolina
Mar 19, 2006
#2
  • Mar 19, 2006
  • #2
Both pics are of bare metal. BTW you don't have to go to bare metal with the Rust Encapsulator, just remove the loose rust and go at it. Of course you still want to get that tar looking crap off of there so it is actually on the metal or rust.
 

wild70stang

New Member
Nov 11, 2005
317
0
0
Mar 19, 2006
#3
  • Mar 19, 2006
  • #3
the first picture in the attachments show the silver encapsulator paint that I used, even though it only covers a small area of the bare metal, im gonna finish it tomorrow( or at least most of it). My parents digital camera sucks, I'll use a light to help illuminate the trunk next time. I decided to use an encapsulator because I wanted to know that I have removed all of the rust and when I get enough money im gonna get the car stripped down and have it sand blasted. But that wont be for another 4 years so this is gonna have to do for now.
 

stangkid88

New Member
Nov 11, 2005
112
0
0
Seattle area
Mar 19, 2006
#4
  • Mar 19, 2006
  • #4
looks good, I've been planning on doing that (but with por15) in a couple of weeks. hope it turns out nice!
 

xoxbxfx

Founding Member
May 9, 2001
3,959
0
0
Southlake, TX
Mar 19, 2006
#5
  • Mar 19, 2006
  • #5
Lookin good, you are LUCKY. Check out my Mach1 progress pics..we replaced the ENTIRE trunk
 

wild70stang

New Member
Nov 11, 2005
317
0
0
Mar 20, 2006
#6
  • Mar 20, 2006
  • #6
dam, that sucks that you had to replace the entire trunk. Besides the rust, I have a leak somewhere and I believe its coming from the dumb rear windshield. Also I have a small problem with rodents, everytime I kill one that I find in my trunk, another one appears 3 weeks later
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
Mar 20, 2006
#7
  • Mar 20, 2006
  • #7
Couple of suggestions on keeping rodents out of your car.

1. Put a bar of Irish Spring in the car, they don't like it for some reason.

or....

2. Put a few Bounce dryer sheets in the car, same reason above. Plus, either one makes your car smell nice.

or....

3. When you go to get a haircut, take a baggie and put some of the hair in the baggie and put that in your car. Sorta funky, but no scent and it works.

I used to have a problem with mice getting into my garage, they'd chewed the end of the rubber stop on the bottom of the garage door off and were getting in at the corner. I usually buzz my hair off with the shears during the summer and I took the hair and piled it up behind the rail there in the corner, voila!! no more mice!!!

I got that idea from the movie "The Rookie" where they put hair on the baseball field to keep the deer away.
 

wild70stang

New Member
Nov 11, 2005
317
0
0
Mar 20, 2006
#8
  • Mar 20, 2006
  • #8
lol. I have realy long hair right now and was thinking of cutting it anyway. Besides I have one of those mouse traps were the metal bar comes down and crushes their body. Im not sure when i will finish the trunk now because its gonna rain for the next few days
 
O

Oldbutspry

New Member
Mar 5, 2006
20
0
0
Mar 20, 2006
#9
  • Mar 20, 2006
  • #9
Personally, I prefer mothballs. It makes me feel like Granny is riding everywhere with me....
 

67 GTA

Member
Feb 7, 2003
494
0
16
Frankln, Kentucky
Mar 20, 2006
#10
  • Mar 20, 2006
  • #10
The dryer sheet trick works well for me. I always kept a fresh one under each seat. Plus it helped cover up the 37 year old seat foam smell!
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
Mar 20, 2006
#11
  • Mar 20, 2006
  • #11
It's not the foam, it's the recycled beans making their way thru the comfortweave, LOL!!!!
 
You must log in or register to reply here.

Similar threads

Progress Thread Build thread. Project Problem child. 1967 Coupe.
  • billison
  • Sep 16, 2024
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2
Replies
21
Views
973
1965 - 1973 Classic Mustangs -General/Talk- Mar 31, 2025
billison
New to me 98 Cobra
  • bird_dog0347
  • Feb 25, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
26
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
FastDriver
Progress Thread Nicholase "lights out" build-
  • nicholase
  • Aug 10, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 26 27 28
Replies
548
Views
39K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 10, 2026
nicholase
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Let's talk chassis/under carriage cleaning, coating and painting
  • 2000xp8
  • May 1, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 3, 2023
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?