Trying too figure what cam I have

[Dave 68]

I ha v a Ford small block cam with usa stamped on back end of cam with these numbers 112853 and 271402 and 271326

 

[gkomo]

Found this on a Google search:

Thread 'Does anyone know what cam this is?'

Aug 19, 2010

I recently bought a cam off ebay. The seller listed it as the eddy performer rpm 7122. However today when i called edelbrock they said they did not recognize the cam numbers.

if the cam end were viewed as a clock the numbers 112853, and directly under 260880.These are at 12 oclock.


at about 9 oclock the numbers 252912

and at 6 oclock it says USA

This is the end of the cam that the timing chain bolts to.

Any help would be greatly appreciated and rewarded.

Thanks

• MuscleFox
• Replies: 5
• Forum: Fox 5.0 Mustang Tech

Where someone posted this:

"That's an edelbrock flat tappet rpm cam part#7122 the specs are 224/234 duration 496/520 lift and 112 lobe separation. Go to CJ Pony Parts - Ford Mustang Parts and look it up by the part#EDL7122."

This thread is back from 2010

 

[AeroCoupe]

Quick google search…

Thread 'Does anyone know what cam this is?'

Aug 19, 2010

I recently bought a cam off ebay. The seller listed it as the eddy performer rpm 7122. However today when i called edelbrock they said they did not recognize the cam numbers.

if the cam end were viewed as a clock the numbers 112853, and directly under 260880.These are at 12 oclock.


at about 9 oclock the numbers 252912

and at 6 oclock it says USA

This is the end of the cam that the timing chain bolts to.

Any help would be greatly appreciated and rewarded.

Thanks

• MuscleFox
• Replies: 5
• Forum: Fox 5.0 Mustang Tech

 

[gkomo]

Quick google search…

Thread 'Does anyone know what cam this is?'

Aug 19, 2010

I recently bought a cam off ebay. The seller listed it as the eddy performer rpm 7122. However today when i called edelbrock they said they did not recognize the cam numbers.

if the cam end were viewed as a clock the numbers 112853, and directly under 260880.These are at 12 oclock.


at about 9 oclock the numbers 252912

and at 6 oclock it says USA

This is the end of the cam that the timing chain bolts to.

Any help would be greatly appreciated and rewarded.

Thanks

• MuscleFox
• Replies: 5
• Forum: Fox 5.0 Mustang Tech

Great minds think alike.

 

[Noobz347]

 

[Bullitt347]

I am surprised.
Usually the default is "B" cam.

 

[AeroCoupe]

 

[Noobz347]

Read the warning label before removing from shipping materials.