• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Upgrading 5.0

  • Thread starter Thread starter 885.0conv
  • Start date Start date Jan 19, 2008
8

885.0conv

Member
Jan 9, 2008
238
0
16
Phoenix, Az
Jan 19, 2008
#1
  • Jan 19, 2008
  • #1
I just got a stock 5.0, except for exhaust, and I am going to have to replace the rear main seal. I was wondering since I have the tranny off what are some good upgrades to do. The car was sitting in the guy's garage for three years so that maybe why the seal is leaking. The engine only has about 60K so I don't want to a h/c/i change until something breaks. I have already done all the little things like a tune up and changing all the fluids. My ultimate goal is to get about 350hp and fast 0-60 times (power in the lower band). Thanks for any help.
 

Aaron

20+ Year Stangneter
Dec 5, 2003
95
40
38
Buffalo, NY
Jan 19, 2008
#2
  • Jan 19, 2008
  • #2
The clutch, pressure plate, flywheel, etc are all obvious choices, assuming you have a manual transmission.
 
8

885.0conv

Member
Jan 9, 2008
238
0
16
Phoenix, Az
Jan 19, 2008
#3
  • Jan 19, 2008
  • #3
Mine is an automatic, I was thinking about a shift kit but don't know which one I should get.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Jan 19, 2008
#4
  • Jan 19, 2008
  • #4
Torque converter and shift kit is what I would do. Also a trans cooler is a good idea for those AOD's.

Also get some gears in the rear...3.73's or 4.10's.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 19, 2008
#5
  • Jan 19, 2008
  • #5
4.10s, 2500-3000 stall, and a trans go shift kit. (NO, shift kits are not all the same) If you really want a difference put the wide ratio planetary gear set in the tranny.
 
P

PJC Racing

New Member
Nov 21, 2007
199
0
0
Jan 20, 2008
#6
  • Jan 20, 2008
  • #6
gears
 
8

885.0conv

Member
Jan 9, 2008
238
0
16
Phoenix, Az
Jan 20, 2008
#7
  • Jan 20, 2008
  • #7
how much difference is there from 3.73 and 4.10 gears on the AOD. I heard 3.73 are the best.
 

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
Jan 20, 2008
#8
  • Jan 20, 2008
  • #8
885.0conv said:
how much difference is there from 3.73 and 4.10 gears on the AOD. I heard 3.73 are the best.
Click to expand...

AOD=410's from what I have read, although I can tell you now this has to be one of the most debated subjects , so stand by.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 20, 2008
#9
  • Jan 20, 2008
  • #9
2,200-2,500 stall, 4.10's, and a Trans Go kit will make you never want a T5 again
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 20, 2008
#10
  • Jan 20, 2008
  • #10
I am using 3.73s. I do intend to have the wide ratio gear set in buy spring. With 3.73s it will work like 4.40 gear. My brother has 4.10s and from driving both I can say that I would be tempted to go 4.30. A low gear is your best friend with a aod.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jan 20, 2008
#11
  • Jan 20, 2008
  • #11
I agree with shift kit, stall converter, AOD cooler, and a fresh gasket, filter, and fluid. Make sure you flush the cooling lines to the radiator. Most people forget that olds about a pint of old dirty fluid.

I would also replace the oil pan gasket. I did mine when the trans was out. I needed a clutch and trans rebuild...AND my oil pan started leaking right before, so it worked out good. Having the trans out was a huge plus.

I would also replace your water pump and T-stat. Pumps are cheap about 28 bucks at Murrays, and my 5.0L runs really cool after the new pump. The old one had some rust and corrosion around it, fortunately the rest of the cooling system was fine.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Jan 20, 2008
#12
  • Jan 20, 2008
  • #12
I have an AOD and 3.73's......i wish i went 4.10's.


Do you have a convertible? If so you def want 4.10's with the extra weight
 
P

PJC Racing

New Member
Nov 21, 2007
199
0
0
Jan 20, 2008
#13
  • Jan 20, 2008
  • #13
AOD= 4.10
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jan 20, 2008
#14
  • Jan 20, 2008
  • #14
MY AOD I had with 4.10's shifted too quick. It seemed to skip 2nd gear unless I did the AOD shuffle.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Jan 20, 2008
#15
  • Jan 20, 2008
  • #15
SVT32VDOHC said:
MY AOD I had with 4.10's shifted too quick. It seemed to skip 2nd gear unless I did the AOD shuffle.
Click to expand...

What shift kit? I'm guessing it wasn't a trans go. Or you didn't install the whole kit.
 
8

885.0conv

Member
Jan 9, 2008
238
0
16
Phoenix, Az
Jan 21, 2008
#16
  • Jan 21, 2008
  • #16
Yeah, mine is a convertible. So I will go with 4.10 gears. I heard from a guy at work an autos with a shift kit are better than manuals because the computer can shift faster than a human so that is why I went with an auto. Also is a shift kit hard to install. I have never been inside a tranny. From what I have heard I think I will take my car down to the shop to have the gears installed. I have done everything to an engine except rebuild it so I am mechinally incline. To answer SVT32VDOHC I changed all the hoses, t-housing, and thermo. The guy I brought it from said the water pump was about 9 months old. The temp was getting to 270 before I changed it but now it holds at 180-200.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Jan 21, 2008
#17
  • Jan 21, 2008
  • #17
885.0conv said:
I heard from a guy at work an autos with a shift kit are better than manuals because the computer can shift faster than a human so that is why I went with an auto.
Click to expand...


While technically true, the gear ratios in the AOD suck ass.

The split second you gain in the shift is lost through poor ratios.

If you really want to stick with the AOD, look into a wide ratio gearset or maybe an 4r70w conversion down the road.

I have an AOD and have made my car pretty quick, but it will never compete with a well-driven 5-spd Mustang.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jan 21, 2008
#18
  • Jan 21, 2008
  • #18
ttop88 said:
What shift kit? I'm guessing it wasn't a trans go. Or you didn't install the whole kit.
Click to expand...

Car had all mods done when I bought it. No idea what type of shift kit, if there was one. I just fixed the front clip, painted it and sold it for profit. I put about 2,000 miles on it before I sold it though, so I had some time to play with it.
 
You must log in or register to reply here.

Similar threads

Brake pad and rotor upgrade
  • Sparky714
  • Aug 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
634
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Sparky714
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
518
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
176
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
184
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?