Urgent Help Koni STR T rear shock install

0

01GTphoenix

Member

Jan 23, 2020

18

5

13

Springfield, PA

Feb 12, 2020

#1

• Feb 12, 2020

• #1

I am attempting an install of Koni STR-T shock/struts on my 01 GT. I have the factory rear shock removed, but it appears I can’t reuse the factory mounting hardware to reinstall the top mount?? The threads don’t match the factory part. I was told these rear shocks reused factory hardware. FYI, I purchased these off Facebook marketplace, so no additional parts were included. I attached a photo of the thread comparison.

 

STEVE PATTON

I smell a conspiracy

Jan 6, 2019

201

89

53

ohio

Feb 12, 2020

#2

• Feb 12, 2020

• #2

Go to the parts store with one of your shocks and match up new nuts and reuse everything else.

 

0

01GTphoenix

Member

Jan 23, 2020

18

5

13

Springfield, PA

Feb 12, 2020

#3

• Feb 12, 2020

• #3

Would an AutoZone handle the nut you think? I’ve had mixed success at AutoZone lately

 

STEVE PATTON

I smell a conspiracy

Jan 6, 2019

201

89

53

ohio

Feb 12, 2020

#4

• Feb 12, 2020

• #4

Probably so.Even Lowes has a nice selection of both metric and SAE hardware.Or NAPA.

 

0

01GTphoenix

Member

Jan 23, 2020

18

5

13

Springfield, PA

Feb 12, 2020

#5

• Feb 12, 2020

• #5

Thanks for the reply. I will try Lowe’s first

 

Reactions: STEVE PATTON

0

01GTphoenix

Member

Jan 23, 2020

18

5

13

Springfield, PA

Feb 13, 2020

#6

• Feb 13, 2020

• #6

Just a quick update for those that are interested: I was able to successfully install the rear Konis using hardware from Home Depot (closer than Lowe’s to me). The nut size is an M12-1.25 and I used an M12 lock washer, just in case anyone else runs into a similar problem to mine.

 

M

MattMan02GT

Active Member

Jul 24, 2018

111

8

28

Albany, NY

Feb 15, 2020

#7

• Feb 15, 2020

• #7

Nice work and thanks for posting the solution on here!

Did you do lowering springs and front/rear at the same time? What are your thoughts on the STR-T's?

 

0

01GTphoenix

Member

Jan 23, 2020

18

5

13

Springfield, PA

Feb 15, 2020

#8

• Feb 15, 2020

• #8

MattMan02GT said:

Nice work and thanks for posting the solution on here!

Did you do lowering springs and front/rear at the same time? What are your thoughts on the STR-T's?

Click to expand...

I bought the car in November & it already had the Eibach Sportline springs installed. The owner never replaced the stock struts/shocks when they did the springs, which is why I needed to (the ride was really bad). I haven’t finished the install on all 4 corners yet, doing brakes while I'm at it. I expect the car to ride firmer than it did. I also replaced the stock quad shocks with KYB gas adjust shocks.

 

M

MattMan02GT

Active Member

Jul 24, 2018

111

8

28

Albany, NY

Feb 15, 2020

#9

• Feb 15, 2020

• #9

Oh I bet it rode pretty rough with the stockers on. Those Koni's advertise as being for lowered cars and just being newer than the factory should be a great improvement. Good luck and keep us posted how you like the setup once you're back rolling.