Vortech Owners...Drain Hose Question

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Aug 1, 2004

#1

• Aug 1, 2004

• #1

I just want to make sure..

The drain hose for the Vortech, is that 3/4" or 5/8" ?

I want to splice a heater hose from down below up into the stock hose higher up so I can check for leaks.

Also, HD does NOT have a double-sided 3/4" joining piece in metal...ONLY in Nylon...If the hose if 3/4", can I use a nylon part to join them??

If it is 5/8", I can get the metal joining piece, since HD DOES sell them..

Thanks
RC

 

YEAHLOH95

Founding Member

Nov 19, 2001

1,249

3

39

EVERETT,PA

Aug 1, 2004

#2

• Aug 1, 2004

• #2

off the top of my head i can't say what size it is but i don't think it willbe aproblem running the nylon it is only a drain .

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Aug 2, 2004

#3

• Aug 2, 2004

• #3

Thanks..
I know Shaun would know the answer for sure....Where the h3ll has he been?

Chris...Whatcha know??

Problem is it's hard to measure that...Ill try Vortech and do another search on here.
Thanks
RC

 

94TURBO5 O

New Member

Mar 14, 2004

2,509

0

0

VA

Aug 2, 2004

#4

• Aug 2, 2004

• #4

Didn't I measure it for you before? You are in luck b/c the last time I measured it for you I had the blower off for a HG install and I just ripped mine off again last night. I will get you the measurement again. Stand by, Sir.

 

94TURBO5 O

New Member

Mar 14, 2004

2,509

0

0

VA

Aug 2, 2004

#5

• Aug 2, 2004

• #5

The hose is 2.5 in cir. and 1/2" (inside diameter)

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Aug 2, 2004

#6

• Aug 2, 2004

• #6

94SC50 said:

The hose is 2.5 in cir. and 1/2" (inside diameter)

Click to expand...

That hose is ONLY 1/2"??

I thought it was a 3/4 or 5/8

I dont feel like taking off the head unit to replace the ENTIRE hose, so for now, Im just gonna disconnect the stock hose from the oil pan stem, connect a piece of heater hose to it, then cut the stock one about 18" up above, and spice the new heater hose into it using the joiner piece and 2 clamps..If it is INDEED 1/2", I can get that joiner piece in metal.

Thanks for the effort JR..I need you to move back down here so you can help me with maintenance on my car..

RC

 

94TURBO5 O

New Member

Mar 14, 2004

2,509

0

0

VA

Aug 2, 2004

#7

• Aug 2, 2004

• #7

No problem dude anytime.