• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

want to purchase pulleys

  • Thread starter Thread starter tstang21
  • Start date Start date Jun 24, 2008
T

tstang21

Member
Apr 14, 2008
219
0
16
Jun 24, 2008
#1
  • Jun 24, 2008
  • #1
1 of my next mods i want to get is pulleys (alt,wp, crank). but im having second thoughts. what concerns me is that i keep reading about overheating, draining power out of battery faster or blowing out the alternator. my uncle has march pulleys and it runs great but his car is a weekend car not daily. he has no problems only when he's in traffic for a period of time then it starts overheat a bit. i live in south floridas and temps in the summer gets around 88-91 degrees. the good is that i dont drive alot of mile for daily commute. a total of 4 miles a day. the set im looking at is bbk or march.
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Jun 24, 2008
#2
  • Jun 24, 2008
  • #2
I have the March pulleys. As you might have seen in my thread- I've had some problems with the alternator not charging my battery. This is the second time I've had the pulleys on, and they worked fine the first time.
 

'94ChickStang

Member
Sep 27, 2004
301
0
17
northern ca
Jun 24, 2008
#3
  • Jun 24, 2008
  • #3
mustang6tee8 said:
I have the March pulleys. As you might have seen in my thread- I've had some problems with the alternator not charging my battery. This is the second time I've had the pulleys on, and they worked fine the first time.
Click to expand...

+1

I have ASP Pulley's and before my HCI swap, they drained my battery regularly. With the tune I have now, my idle is a bit higher so I've had no charging issues since...I never had any cooling issues.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jun 24, 2008
#4
  • Jun 24, 2008
  • #4
MY friend put them on his 95GT with an auto transmission with no problems at all. Make sure you have a good alternator and good battery before you install them.
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Jun 24, 2008
#5
  • Jun 24, 2008
  • #5
I had some MAC ones, and my car would die at idle sometimes. Im willing to bet if I put them back on I wouldnt have a problem though. I have since changed my alt and got an Optima Red Top.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Jun 24, 2008
#6
  • Jun 24, 2008
  • #6
I didn't swap the alt pulley on mine when I had them before but I did on the water pump but I never had any issues. I don't even know if the stang I have now has them on it if it doesn't it will soon.
 
T

tstang21

Member
Apr 14, 2008
219
0
16
Jun 25, 2008
#7
  • Jun 25, 2008
  • #7
i dont think theres alot to gain out of pulleys. maybe 5 hp tops. i might as well look into a crank pulleys only
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Jun 25, 2008
#8
  • Jun 25, 2008
  • #8
There is a definate "seat of the pants" gain
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Jun 25, 2008
#9
  • Jun 25, 2008
  • #9
mustang6tee8 said:
There is a definate "seat of the pants" gain
Click to expand...

Ill agree.
 

Bosko5.0

Active Member
May 18, 2006
1,067
0
37
longwood, FL
Jun 25, 2008
#10
  • Jun 25, 2008
  • #10
I am running ASP pulleys from steeda. with all the mods in my sig I don't have a cooling problem, but for some reason at idle the voltage drops only to between the N and O but it won't drop any lower, not even when I turn the AC on and turn my hid's on. but I do have a relocated drycell battery.


AND my brand new 130amp PA performance alt is dead So Iam running my 130,000 mile stock alt.
 
T

tstang21

Member
Apr 14, 2008
219
0
16
Jun 25, 2008
#11
  • Jun 25, 2008
  • #11
oh i was figuring there wasnt any power gain. misconception i guess
im looking into either bbk or march since im on a budget. im still cautious about draining power out of the battery. the water pulley im fine since i try to avoid stopped traffic. hence to that, ill look into a 93 cobra pulley if i find 1.
 

Dino Dino Bambino

15 Year Member
Jun 13, 2007
1,672
89
79
Cyprus
Jun 25, 2008
#12
  • Jun 25, 2008
  • #12
I have the ASP crank pulley and I don't have any charging nor cooling issues at idle. It's probably a good compromise given the potential problems associated with underdrive alternator and water pump pulleys.
 

Yobi1Kanobi

Member
Apr 9, 2003
559
0
16
Jun 25, 2008
#13
  • Jun 25, 2008
  • #13
I have heard good things about March and I personally have FRPP and they really never caused me any problems.
 

GTA_V6_Mustang

Active Member
Nov 29, 2004
1,326
3
39
Miami, FL
Jun 25, 2008
#14
  • Jun 25, 2008
  • #14
I have BOI aluminum underdrives and have NO cooling issues what so ever and as no charging problems. And I have seen charts showing a 10-12 RWHP increase with u/d and 16lbs torque so for the $80 i spent on the pulleys thats pretty worth it. That and I also saw the 5rwhp from removing the snorkel, lol.
 

SVTtripleblack

New Member
Dec 4, 2007
166
0
0
Lancaster, PA
Jun 25, 2008
#15
  • Jun 25, 2008
  • #15
I have the Mac u/d pullies. My volt meter would show a drain, but never get below a certain point. It made my headlights dim while idling, but I never had stalling or a dead battery. Before I got my tune at the beginning of this Summer my car was getting close to overheating while sitting in traffic. My tuner set my idle at 850rpm's and I haven't had any problems since. My temp never goes higher than half way and my voltage stays at half as well. They are deffinately the best hp gain for the money spent. I noticed a nice gain from the SOTP meter. You could try to play with your idle screw to see if you can get the idle up some. This will help the accesories keep up at idle. It's worth a shot.
 
T

tstang21

Member
Apr 14, 2008
219
0
16
Jun 25, 2008
#16
  • Jun 25, 2008
  • #16
awesome. for the price, it seems like a bang for the buck. ill check around with idle once its on. now im on the market to buy some after the gears installed. im looking at march pulley or steeda. im not sure about the bbk set.
 
You must log in or register to reply here.

Similar threads

J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
C
Help cooling issues urgent!
  • Cclaro
  • Apr 17, 2021
  • 1994 - 1995 Specific Tech
Replies
17
Views
2K
1994 - 1995 Specific Tech Apr 19, 2021
KRUISR
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Fox The build - 4eyed Fox - Stoppie Montoya
  • mansour.aref
  • Aug 20, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 20, 2022
General karthief
Engine Cant figure out drive pulley's???
  • rabidscoobie
  • Mar 29, 2020
  • SN95 4.6L Mustang Tech
Replies
9
Views
2K
SN95 4.6L Mustang Tech Apr 8, 2020
rabidscoobie
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?