Way OT Explorer radiator

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Does anyone know how to change the radiator in a 96 Explorer 4.0 v6?

We are on a road trip and need to change one. Most important, do I have to take the engine fan off? And if so, do I need a fan wrench, etc?

Thanks.
 
I have done this, and its one of the worst i have ever done. if yours has the tabs (look down the drives side, and see if there are 3 plastic tabs sticking out from the plastic shrouds that hold the radiator in) youll know what i mean when you look at it. i ended up having to cut the middle one off to get the damn thing out. i talked to several mechanics about it, and they all said the one i was doing was the worst. it has two plastic supports, one on either side and they make it a PITFA to get out. if thats not the radiator you have, shoudlnt be much to it at all. i removed the fan and shroud to make sure i wouldnt jack up the fins. took it to a radiator shop, had them reseal the tank, and reinstalled it. cutting that tab did nothing but make it easier to get it out & in. i noticed no difference support wise.
 
Thanks.

This one was straightforward. We are in South Mississippi, and the closest we found the radiator was in Mobile. So we bought the radiator.

It was easy to change. I did loosen the fan, but I did not need to. Just move the shroud the back.

Pulled the hoses, the at cooler lines and off she came.

This one had two tabs at the bottom of the tanks for the shroud to sit in. I did break a tab on the pass side putting the new one in. Other side fit fine, and it will work just fine.

A big thanks to Rainbow Radiator in Mobile AL, for getting the radiator in 2 hours! And outstanding grilled sausage!
 
Glad to hear you got it taken care of. Im not positive of the year of the one i worked on, but be happy it only had those 2 tabs instead of 3. I had to leave work early that day i was so mad.