• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Weird Noise

  • Thread starter Thread starter blackstallion89
  • Start date Start date Apr 1, 2008

blackstallion89

New Member
Aug 18, 2007
16
0
0
Apr 1, 2008
#1
  • Apr 1, 2008
  • #1
Hey guys, Ive had great luck getting help here before and hopefully someone can again help me out. My car recently has been throwing me for a loop. Its been parked since the track closed last november till about a month ago. I replaced my worn out radiator for a new ford racing and began to get it out again. Now Im getting a weird vacume leak sound coming from around the intake area. Ive checked all the vacume lines and capped all the ones that were not used. I also removed the upper intake and checked the gasket. The noise only starts once the car warms up and you can only hear it at idle. Its also causing the idle to surge. And the worst part is when I shut the car off you can hear this crazy squeal for a second or two then it makes like a popping sound and just stops. It all comes from around the intake and sounds mostly like its coming from behind it. Whatever it is its allowing pressure to bleed from something when the engine is stopped like a gasket or vacume. Please help me figure this out..the car still runs fine (8.0 in the 1/8th) but is mostly annoying. Please help.
 

Redfire 05

New Member
Apr 6, 2005
236
0
0
Lubbock, TX
Apr 1, 2008
#2
  • Apr 1, 2008
  • #2
This is just a total wild guess, but maybe the pcv check valve or filter is clogged up? The filter is in the intake just below the pcv valve, and it's really hard to get to but they can get clogged up and cause problems.
 

blackstallion89

New Member
Aug 18, 2007
16
0
0
Apr 1, 2008
#3
  • Apr 1, 2008
  • #3
Thanks I'll check it out
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Apr 2, 2008
#4
  • Apr 2, 2008
  • #4
Title edited. Please don't use symbols to bypass the language filter.

It definitely sounds like you have a vacuum leak somwhere. Pick up some carb cleaner and spray it sparingly around any vacuum hoses, ports, and between the upper and lower plenums, to see if it raises your idle any.
 

blackstallion89

New Member
Aug 18, 2007
16
0
0
Apr 2, 2008
#5
  • Apr 2, 2008
  • #5
Thanks..My bad on the title.
 
You must log in or register to reply here.

Similar threads

E
Noise near blower motor behind dash?
  • Ethereal_Zer0
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
343
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Ethereal_Zer0
E
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
107
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
G
Electrical Getting good ground in 1991 Fox Vert for amps - getting popping noise when I turn on the lights?
  • gvanginkel403
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
257
Fox 5.0 Mustang Tech May 9, 2026
CAMTWO1070
W
1993 LX 5.0 dies after ignition parts replacement
  • Warhorse85
  • Aug 16, 2025
  • Fox 5.0 Mustang Tech
  • 5 6 7
Replies
122
Views
3K
Fox 5.0 Mustang Tech Nov 4, 2025
General karthief
J
High idle 2003 Mach 1
  • JohnnyUtah
  • Mar 29, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
126
SN95 4.6L Mustang Tech Mar 31, 2026
JohnnyUtah
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?