Weld Daglite Backspacing

dcurtis

10 Year Member
Jan 19, 2006
688
7
39
Was thinking about runnig17 inch draglites but have decided to go ahead with the 15 inch ones, my question is what size and backspace should I run on the front and the rear, i was thinking 15x7 up front and the 15x10 for the rear.
Can I run the 15x10 with no rubbing problems? Or should I get a 15x8 or 9, I just don't want them sticking out, would like them to not hit my fender lip if I hit a hole or something.
 
This won't be a ton of help, but I purchased what was supposed to be 15x10 draglites with 6.5" backspacing from ebay. I think they're actually 15x9 w/ 5.5" backspacing. I measured and that's what I came up with, but I need to remeasure. I measured 3 or 4 times, but I could have measured wrong, although I doubt it.

Either way, I have 275/50 BFG Radial TA's mounted on mine and they sometimes scrape in the back, but I'm not sure if they're scraping the outter fender or the inner fender on the back side of the tire. If I get my rear end sliding at all or go up an uneven grade at an angle (anything that causes the suspension to move very much basically), they rub.

I was able to keep my quad shocks without reversing them, but I did have to dent the casing a little. They're still functional. There are probably 50 threads about this, so do a search and you'll find tons of info on this subject. I don't think they'll stick out of the fender, but I'd bet you'll rub somewhere. Come to think of it, my tire may be rubbing on my quad shock. Many guys remove their quad shocks, but that's only recommended if you have aftermarket control arms as the quad shocks help control wheel hop. You can also reverse the quad shocks, but I don't think that worked for me for some reason. I can't remember...it's been a couple years:shrug:

Again, do a search and you'll find loads of info:flag:
 
Thanks User, I have been looking for info on the fitment of the weld draglites and I found a page that has pics of many differant sizes and backspacing pics on foxbodies and the way I want it to look I would need a 15x8 with 5.5 backspacing, I like the tucked look in the rear, so thats the reason for the 8's, and I can still run descent tires.
 
10 is too wide IMO. to get a tire to fit you will have to have lower backspacing on it and then it will be sticking out past the fender like a sore thumb

i run a 15x8 with 5.5 BS it fits nice and it tucked nicely under the car. i am running a 255/60 tire with them. quads must be flipped or removed for my rims and tires.

i run skinnys up front i like the skinny look

you can easily fit a 275 tire on an 8 inch rim but to do it on the 15x8 with 5.5 BS you will have to beat the fenders i think.

better to just get another 15x8 with a 4.5 BS, will stick out farther but still looks good and you can get the tires u need on.
 
foxfan, I have descided to go with the 5.5's, the page with the pics I was talking about is, http.corral.net/projects/deepfreeze/dfwheels.hotmail if any one else wants some pics for comparison.