• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

went to the track, think i broke an axle

  • Thread starter Thread starter just some guy
  • Start date Start date Jan 16, 2004
J

just some guy

Founding Member
Sep 23, 2002
723
0
0
FL
Jan 16, 2004
#1
  • Jan 16, 2004
  • #1
went to the track tonight, pulled a few 1.7' 60's again on my nittos, staged went to launch, and boom...

the pass. side wheel rotates, and rotates the driveshaft along with it, but when i try to rotate the driver side wheel, it does not move. when i put the car in 1st gear and let the clutch out, the pass. side wheel rotates whereas the drivers side makes a nasty clunking noise, and will sometimes spin, whereas other it just makes the noise and does not.

any ideas.
hopefully i can get it fixed by thursday at 4 am, cuz thats when i have work.

thanks
matt

ps. got it towed back to my apt. complex
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
Jan 16, 2004
#2
  • Jan 16, 2004
  • #2
fawk.. like bamf said 31splines baby.. i won't be dumping with stock splines and my 4.30's anytime soon.. eek
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Jan 16, 2004
#3
  • Jan 16, 2004
  • #3
nittos + rpms + hook = ghost face axle killa!!!!
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jan 16, 2004
#4
  • Jan 16, 2004
  • #4
I would pull the differential cover and see if you can see the axle splines where the c-clip holds it in place. It may make itself obvious once you get the cover off. If it snapped, it will probably be easy just to pull on the wheel real hard and it will slide out in your hand.
 

Zinc001

New Member
Oct 27, 2001
410
0
0
Jan 17, 2004
#5
  • Jan 17, 2004
  • #5
coramprat said:
I would pull the differential cover and see if you can see the axle splines where the c-clip holds it in place. It may make itself obvious once you get the cover off. If it snapped, it will probably be easy just to pull on the wheel real hard and it will slide out in your hand.
Click to expand...
You would have to remove the brake caliper to do that.
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jan 17, 2004
#6
  • Jan 17, 2004
  • #6
Zinc001 said:
You would have to remove the brake caliper to do that.
Click to expand...
Yep...that would be obvious. Anyway you will know for sure once you do this. If it is a broken axle you may want to replace the wheel bearings to make sure you don't leave metel in there to screw them up.
 
You must log in or register to reply here.

Similar threads

K
Drivetrain Roulette Sound when spinning tires while jacked up
  • Knuckle Dragger
  • Aug 3, 2023
  • SN95 4.6L Mustang Tech
Replies
5
Views
1K
SN95 4.6L Mustang Tech Aug 27, 2023
Knuckle Dragger
K
H
New kid on the block
  • HydraX
  • Mar 22, 2025
  • The Welcome Wagon
Replies
17
Views
776
The Welcome Wagon Mar 22, 2025
HydraX
H
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
D
Fox Does this sound like a bad cv axle/joint?
  • DroptopFab916
  • Jul 5, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2022
DroptopFab916
D
Betty white budget build
  • Stevenmverrill
  • Jun 16, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 15, 2023
2Blue2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?