Well fellas I got the slicks mounted yeasterday and loaded the car up on the trailer for another track night. I got a set of M/T Et streets I wanted to try out so I ready to go. The weather right now is in the upper 90s with 85% humidity, but thats what I gotta go with! Last time out I went 12.4 at 110 on nittos with the same setup minus the et streets. I ran them at 12psi with a 4000rpm dump, and cut a 1.63 60ft. I ran 7.7 1/8th and an AWSOME 12.13 1/4 I will put this thing in the 11s. The tires were hooking but were still spinning once or twice off the line. I still have the stock plenum and TB, all I got is UD pulllies, comp cams, and ported NPI heads. I think a PI intake, plenum,TB combo would put me mid 11s. AH well, let me know what yall think. I got some great videos from right on the starting line at tire level of me running. I will make a vid and post it tonight. Also, I need to rebuild my clutch packs, the drivers tire didnt burn out all night.
Went to the track with the slicks on the 150shot!
- Thread starter Drew1287
- Start date
CTGrey02
Founding Member
Good luck with the 150 shot. I hope you have some $$$ in case something should go wrong. Great run.
Congrats man, but like said above, make sure you got some money set aside for a new shortblock in case something does happen. Also think about the rear end. 
GTsleeper
New Member
Right On! Looking forward to the video, sucks with all that humidity in the air like to see the difference in numbers during the fall. I know how it is I live in St.Louis thats all we get 90% humidity.
