What do you all think? Question about racing stripes

G

GT98

New Member

Feb 7, 2003

194

0

0

Columbia, MD

Mar 31, 2005

#1

• Mar 31, 2005

• #1

I've been going back and forth with the idea of putting stripes on my stang. I've finally decided to go ahead and do it. But my question is what width? I'm debating between 10" and 12" stripes. I was planning on spacing them about an inch or so apart. Also, the only decent kit I've found only comes in a 15 foot roll; would that be enough to cover the entire car including the bumpers and spoiler (stock)? Anyone whos got pics, has done this before, or has any insight please help. I'm not very familiar with the subject. Thanks everyone

 

Thundermouse

Member

Sep 17, 2003

168

3

18

Decatur, GA

Mar 31, 2005

#2

• Mar 31, 2005

• #2

There is a forum on here where guys can help you see what your car will look like... its the photochop one at the bottom... they are nice guys

 

G

GT98

New Member

Feb 7, 2003

194

0

0

Columbia, MD

Mar 31, 2005

#3

• Mar 31, 2005

• #3

I already have a pretty general idea what it will look like. I was just wondering what you all thought.

 

edbo

New Member

Mar 31, 2005

198

0

0

Valley, AL

Mar 31, 2005

#4

• Mar 31, 2005

• #4

What color? White I hope (on Rio Red). I have a 98 too (Vert), no stripes but had it done on a '66 Coupe once. I kept them at 10". I would think 10" on 98 as it would be more forgiving, especially over the hood (and front bumper cover if you plan to go there, and you should!). As for a 15 foot roll, you better get at least two rolls if you're doing a pair of stripes. The top and hood alone will probably require about 8-9 feet for each stripe.

 

G

GT98

New Member

Feb 7, 2003

194

0

0

Columbia, MD

Mar 31, 2005

#5

• Mar 31, 2005

• #5

I'm definitely gonna go with white. The kit I found is 2 15 foot rolls so I can make the dual stripes (one roll per stripe). I plan on doing the entire car, bumpers and all since I think it looks stupid if the stripes stop right at the bumper. You don't think 15 feet will cover the car bumper to bumper?

 

G

GT98

New Member

Feb 7, 2003

194

0

0

Columbia, MD

Mar 31, 2005

#6

• Mar 31, 2005

• #6

bump

 

edbo

New Member

Mar 31, 2005

198

0

0

Valley, AL

Mar 31, 2005

#7

• Mar 31, 2005

• #7

GT98 said:

I'm definitely gonna go with white. The kit I found is 2 15 foot rolls so I can make the dual stripes (one roll per stripe). I plan on doing the entire car, bumpers and all since I think it looks stupid if the stripes stop right at the bumper. You don't think 15 feet will cover the car bumper to bumper?

Click to expand...

2 Rolls for 2 stripes @ 15ft per roll, you'll probably have about a foot each to spare. You're right, you definitely should do the bumpers and all. I did that on my '66 (mine were painted on) years ago. Just don't rush it and take your time to make sure you measure twice or three times before cutting anything. Make real sure you have a very clean surface (you might want to use clay to clean) and wait until after you've got it right before polishing and/or waxing. Another tip, since you're using tape, I would run a little masking tape over the edges of the stripes before waxing it. Pull the tape off and then remove the wax, that way you don't get wax piled up next to your stripes. The main thing about white stripes is keeping them clean, especially up front with bugs/tar/debris/etc. With your stripes being tape, I would find a good effective cleaner to use to clean them (check and see what is recommended for tape). I had to use rubbing compound on my 'painted' stripes, a little rough but it did a good job. You'd probably need something like 409 or something. Good luck and please post a pic of your striped 'stang when you "Git 'er done!". I just might have to give my 98 a pair of 'em!

 

Gunfighter

Founding Member

Nov 30, 1999

186

0

0

Grapevine, TX

Mar 31, 2005

#8

• Mar 31, 2005

• #8

you will probably need 2 rolls, and I'd definitely cover the bumbers and all.

 

G

GT98

New Member

Feb 7, 2003

194

0

0

Columbia, MD

Apr 1, 2005

#9

• Apr 1, 2005

• #9

Would anyone happen to have a pic of a 94-98 stang with 10 inch stripes?

 

blueovalguy

Active Member

Aug 20, 2002

1,364

0

36

York Haven, Pa.

Apr 1, 2005

#10

• Apr 1, 2005

• #10

Check out www.bobwhitedecals.com

http://www.bobwhitedecals.com/Products/9903Decals/9903SS.html

He has stripe kits already set up.

 

edbo

New Member

Mar 31, 2005

198

0

0

Valley, AL

Apr 1, 2005

#11

• Apr 1, 2005

• #11

blueovalguy said:

Check out www.bobwhitedecals.com

http://www.bobwhitedecals.com/Products/9903Decals/9903SS.html

He has stripe kits already set up.

Click to expand...

Those seem to be pretty decent kits. Judging by the looks of the 94-98 stripes, that in my opinion, the 8 inch stripes seem to look a little better up front which is where they'll catch the most attention. I knew 12 inch stripes were a bit wide, and wasn't so sure about 10s until I saw the pics.

 

tl75keith

New Member

Jul 20, 2004

69

0

0

Owings Mills, MD

Apr 1, 2005

#12

• Apr 1, 2005

• #12

I use to like the idea of racing stripes because they were kinda unique but now every 2005 I see has them. That kinda ruins it for me.

 

Pirateinastang

New Member

Mar 30, 2005

30

0

0

Carlisle, PA.

Apr 1, 2005

#13

• Apr 1, 2005

• #13

You could be kind of creative and mock the Shelby LeMans stripe set.

 

G

GT98

New Member

Feb 7, 2003

194

0

0

Columbia, MD

Apr 1, 2005

#14

• Apr 1, 2005

• #14

I'm really just looking for some big stripes that'll help with the overall aggressiveness of the cars appearance. I noticed that 8 inch stripes seem to make the car look more narrow; whereas 10 and 12 inch stripes trick your eye into giving the car a wider more pronounced stance, which is exactly what I'm looking for. So I take it 10 inch stripes spaced about an inch apart will give me that look?

 

grendel

New Member

Apr 23, 2004

97

0

0

Apr 1, 2005

#15

• Apr 1, 2005

• #15

ya i would go with the 10" stripes