what else with a S/C?

[deadlast]

first off, my car is stock, and slow. i want it to be alot quicker, and i think a S/C would be the coolest way to get there. i have been looking at procharger, but kenne bells twin screw 2200 looks uber pimp. once i have a S/C (not for a while) i would probably run 11-13 psi, on my basically stock motor. what else am i going to need to make it run real nice? i heard you can get a new fuel management system instead of getting new injectors, but other than injectors, or an fms, what else would be needed?

 

[VooDooChild]

You might want to lower your goal on PSI with a stock motor. Cause if you don't it wont be stock for long.. you will be replacing broken parts..

I would say you could get away with 8psi.
There is no magic part or parts that you can get, as with any forced induction system you have just started to play the A/F game.
Learn as much as you can about A/F and you will not have any problems.

94-95 computers are tempermental on mods. But it is possible to have some pretty beefy modifications if you know what you are doing.

Good Luck.