What intake?

[derikt]

What intake would be the best for this combo? I was thinking of using the GT-40 tubular one, but it might be a bit restrictive. Any suggestions?

AFR165's
Custom Cam
70mm TB
77mm MAF
24# injectors
Shortys
Off road X

 

[Venom351R]

The GT-40 would be just fine for that set up. Either that or one of the Edelbrock intakes.

 

[fiveohh94gt]

gt-40 should be great depending on what you plan to do with the car. if u want, you could get the lower ported and i believe it would flow better than the edelbrock performer (tmoss, correct me if i'm wrong)

 

[Venom351R]

gt-40 should be great depending on what you plan to do with the car. if u want, you could get the lower ported and i believe it would flow better than the edelbrock performer (tmoss, correct me if i'm wrong)

it should, a ported croba/GT-40 will flow better then an edelbrock.

 

[Green 94 5.0]

i had a gt40 tubular with a ported lower. aside from being the best looking intake i have ever seen, it was plenty to see 295whp n/a. i have since sold the car, but the guy that has it now is making 397whp on the same combo i had and an s-trim making a very conservative amount of boost. my point is, unless yuo are building something ridiculous, the gt40 will be more than adequate.

 

[tmoss]

Actually, for AFR heads, either the GT40 lower or the Performer lower need some porting to flow to the potential of the AFR heads. Both are good intkaes - buy the one you find at the best price/in best condition.

 

[mackey]

Hard to tell without the specs on the cam really. Can you at least tell us the powerband of the cam?