What would you do next?

xtrm281gt

New Member

Jul 31, 2003

152

0

0

Sacramento, CA

Apr 30, 2004

#1

• Apr 30, 2004

• #1

Considering my mods below what would you recommend I do next to lower my 1/4 mile times. I want to keep my car naturally aspirated and keep in mind I live in california so any changes (IE cams) would need to be california smog compatible. I don't mind doing minor things like swapping pipes and tunning timing but when it comes to dismantling the motor over smog checks, no thanks. All advice is greatly appreciated

Steve

 

Blakers01GT

Master of the Clubhead

Founding Member

Sep 21, 2001

2,110

0

0

Brown Deer, WI

Apr 30, 2004

#2

• Apr 30, 2004

• #2

Long tubes(if you can) or Accufab TB and plenum.

 

Zinc03GT

New Member

Apr 21, 2004

241

0

0

Mass

Apr 30, 2004

#3

• Apr 30, 2004

• #3

I'm not sure, but you may be able to get away with a stage 1 cam...you may want to ask around. and p&p heads

 

streetstang03

unModerator

Dec 27, 2003

0

1

0

the dark side of the moon/home of the 1999, 2003,

Apr 30, 2004

#4

• Apr 30, 2004

• #4

i say LT's

 

xtrm281gt

New Member

Jul 31, 2003

152

0

0

Sacramento, CA

Apr 30, 2004

#5

• Apr 30, 2004

• #5

California smog law requires aftermarket parts to have an EOC number/certificate proving they are emmissions legal. As far as I know the only company offers this is BBK and only with their shorties, not their LT's

 

streetstang03

unModerator

Dec 27, 2003

0

1

0

the dark side of the moon/home of the 1999, 2003,

Apr 30, 2004

#6

• Apr 30, 2004

• #6

xtrm281gt said:

California smog law requires aftermarket parts to have an EOC number/certificate proving they are emmissions legal. As far as I know the only company offers this is BBK and only with their shorties, not their LT's

Click to expand...

hmmm.........heads then

 

xtrm281gt

New Member

Jul 31, 2003

152

0

0

Sacramento, CA

Apr 30, 2004

#7

• Apr 30, 2004

• #7

i'm pretty clueless when it comes to this area, what type of heads should I shoot for and how much gain vs cost?

 

Blakers01GT

Master of the Clubhead

Founding Member

Sep 21, 2001

2,110

0

0

Brown Deer, WI

Apr 30, 2004

#8

• Apr 30, 2004

• #8

well how much do you want to spend? if you have some cash to spend, send your heads off to T&J peformance in Georgia and have them do a stage 3 P&P, then do some cams, go with a aftermarket intake etc. but that's all pretty expensive.

 

0

01mgvert

New Member

Jan 12, 2004

302

0

0

Apr 30, 2004

#9

• Apr 30, 2004

• #9

You are pretty well covered for bolt-on modifications. You may want to add an Accufab 75 mm throttle body and 75 mm plenum, as well as JBA shorty headers. To lower your quarter-mile time, you need to hook-up. The Nitto Drag Radials will help, but you may want to do some work on the suspension, e.g., Steeda lower and upper control arms, Tokico Adjustable Struts and Shocks. This will help to transfer the weight to the rear tires. Finally, there is weight-reduction, where you begin the process of removing unnecessary parts. After that, its practice, practice, and some more practice.

By the way, what are your current quarter-mile times?

 

SLOW04GT

New Member

Mar 16, 2004

75

0

0

Apr 30, 2004

#10

• Apr 30, 2004

• #10

I've heard VT Engines stage 1 cams will pass smog here in CA. I'm not sure what their specs are. When I was looking into a cam for my Z28 I was told by a local shop that they highest cam spec they could get to pass smog was one with a 221/221 lift and 114 LSA but that was on a Z28 not a Mustang GT so I'm just guessing. I've heard that Comp Cams makes a 218/218 114 LSA cam for our cars so that one might be one also.

JBA Shorty Headers are smog legal and also have a CARB number so they are fully legal for CA. There are no mid or full length headers that are legal. Also, the JBA's cost like $500+ bucks and give only a small gain of around 5 HP so that would be one of the last things I would do considering the cost.

Another thing you could do is an alunimum driveshaft. That will give you some more HP from your engine to the wheels and lighten you up a small amount.

I don't know if Plenum & Throttle Bodies affect smog or not but they are easy enough to change out if you had to change back to stock and they give decent gains.

Hope that helps!

 

StangLou

Active Member

Jul 9, 2003

1,264

0

36

Holly Springs, NC

Apr 30, 2004

#11

• Apr 30, 2004

• #11

Id say go with an Accufab Plenum/TB combo
That or try some upper and lower control arms. Steeda makes a nice adjustable set

 

Beau

Founding Member

Jan 29, 2000

3,050

0

0

San Diego

Apr 30, 2004

#12

• Apr 30, 2004

• #12

Cams: VT Stage I's
Heads: Port & Polish them
Intake: TB/Plenum/K&N
Headers: Shorties (JBA)
Midpipe: At your own risk
Exhaust: Pretty much anything
Tune: SCT or EFI Reflash

Suspension:
Springs
Panhard Bar & Torque Arm
K-Member
Adjustable shocks
Lower Control Arms

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 30, 2004

#13

• Apr 30, 2004

• #13

1990StangLX said:

Cams: VT Stage I's
Heads: Port & Polish them
Intake: TB/Plenum/K&N
Headers: Shorties (JBA)
Midpipe: At your own risk
Exhaust: Pretty much anything
Tune: SCT or EFI Reflash

Suspension:
Springs
Panhard Bar & Torque Arm
K-Member
Adjustable shocks
Lower Control Arms

Click to expand...

Do you know anyone that has passed smog with the VT stage 1's?