Whats new with my car...update

OinkAodeOink · Jan 16, 2004

Im sure alot of you know about the turbo kit i built in the last 6 weeks.
Well i had it running and making boost ( 15psi +)
I knew the motor wasnt going to last, since i had a broken ring land before i even put the turbo on.. Broke it from the Vortech, on a crap tune.

Needless to say after a few 15+ psi passes on pump gas, down the local highway, I blew a head gasket to hell, and of coarse blew a TON of oil all over, from all the blow by, caused by the broken piston.
But let me tell ya.. It was insane on 15psi. Stayed pretty striaght to my surprise, and really frekin got down a moved.

Plan is... built up the sportsman block i have sitting in the garage to a 306.. good crank, rods, bolts, pistons.. use some head studs ( 1/2") and some good HG's this time. Should be back in running shorty. Ide give it less then a month.

Nik_95Cobra · Jan 16, 2004

At least you got to have a lil' fun so far. Sometimes I like breaking stuff to force me into buying something cooler and better. (Long as I have the cash at the time)

Killercanary · Jan 16, 2004

Damn, that sucks. You went through all that work and to have it go that quick. Good luck with the new shortblock. Make sure to girdle that thing, I'm not hearing very good things about the sportman block... I hope you have better luck than most have with it.

Evan5469 · Jan 17, 2004

Well at least since you have almost everything removed from the engine bay it makes it a lot easier to work on.

str8stang036 · Jan 17, 2004

Damn man that sucks!! Yo should of taking it easier the first couple of weeks. But hey if you have the finances, its just an excuse to do something bigger and better.

Good luck with the new engine.

OinkAodeOink · Jan 17, 2004

The piston was already cracked before the turbo went on. Just figured ide crank the boost up real high and see how hard i could beat on it, and have alittle fun with it. You wouldnt believe how bad it was pinging!

It actually still ran decent with the damage, but i was sick of the oil spewing all over, so i decided to pull the motor and do it over. No problem.. This time im going to make everything look real nice under the hood, and mold in the fenders ( on the engine bay side) and repaint it all under the hood.

only took a couple hours to pull all that off. no big deal...

Killercanary · Jan 17, 2004

OinkAodeOink said:
This time im going to make everything look real nice under the hood, and mold in the fenders ( on the engine bay side) and repaint it all under the hood.

That's almost funny!!! Your engine bay is sick as it is!!! When you say mold in the fenders, so you mean fill in all the unused holes?

I seriously had dreams last night that my '90 was all done and I was drag racing it, launching on the transbrake and pulling the wheels off the ground!!! I wish that dream could become a reality sooner than it will.

Did you make a post listing everything you have parts wise into your turbo setup? If so, I'd like to look over it. I wanted to do a JY single buildup, but the powerstroke turbo seems too big on the exhaust side to work with the stock longblock like I plan to use.

yellow5.0cobra · Jan 17, 2004

The powestroke is GOOD ENOUGH.

I am using a powerstroke in the Notchback...

Of course spool time is incredibly long, but it is worth it.. btw I am running stock AOD with 3:73 gears... going to have to go with 4:10's.

If I had a camera I would love to take pictures and show you.

Also on the way is a 1988 4cyl LX, converted to carb'd 347, with a T04b turbo. Should be a very nice setup.

Pete

DirtyD916 · Jan 17, 2004

wats all that gren stuff? and how the hell didi it get in your engine?

1105 · Jan 17, 2004

That would be the engine coolant.. gets pumped into the eigine by the waterpump. That s*it goes everywhere when you take off the heads

That kinda sucks about your car mike, but at least it's making you build up your 306 sooner. Think it'll start up once you get it all put back together or still got an electrical problem somewhere?

94GTLaserRC · Jan 17, 2004

I think deep down inside, Mike wanted it to blow...He knew it was week, he wanted to FEEL the power, and now he has a good reason to build the sportsman!
RC

red94fiveo · Jan 17, 2004

All right I have a question for all you homemade turbo gurus. How do-able is a homemade turbo setup for someone like me who has little experience with turbos, but has done almost everything else on my car (heads, cam, etc.). Also, I have heard about people having tuning problems with turbo cars. How are you guys solving this issue.

yellow1995Cobra · Jan 17, 2004

All right I have a question for all you homemade turbo gurus. How do-able is a homemade turbo setup for someone like me who has little experience with turbos, but has done almost everything else on my car (heads, cam, etc.). Also, I have heard about people having tuning problems with turbo cars. How are you guys solving this issue.

If you have a welder and you know howto use it i would give it a shot. Plus some fabrication ability will help as well.

OinkAodeOink · Jan 17, 2004

Killercanary · Jan 17, 2004

Ouch! There was some cylinder pressure in there for sure!!!

onebad95 · Jan 17, 2004

Killer,

After seeing those pics, are you sure you still want a turbo???

Killercanary · Jan 17, 2004

Yep, just not on my '95. The '90 will have new forged pistons in it before it goes back together and I throw the turbo on it.

OinkAodeOink · Jan 17, 2004

ah i wouldnt worry... That damage wasnt even from the turbo.

Damage was done with the Vortech on 14psi non intercooled.
Car was never tuned, and had a severe problem with detonation.
That and i was running somwhere around 9.5:1 compression on 93 octane.

I wouldnt hessitate to throw a turbo kit on a 90.. Specially since they have forged TRW's stock. Easy 475+ h/p machine right there ( bone stock motor)

VIPERn94Five-0 · Jan 17, 2004

yeah if you dont go nuts with the boost and get a good tune a turbo will actually put less stress on a motor than a blower...

....anyways thats some hard core damage to that piston man

Anthony

S/CBlack95GT · Jan 17, 2004

OinkAodeOink said:

Ahh yes...the power of true detonation. Nothing can hold it back!!

Whats new with my car...update

OinkAodeOink

Nik_95Cobra

Killercanary

The car that set the bar.

Evan5469

str8stang036

New Member

OinkAodeOink

Killercanary

The car that set the bar.

yellow5.0cobra

DirtyD916

Active Member

1105

I AM the random post master...bow down

94GTLaserRC

Squint as you approach, lest you be blinded by my

red94fiveo

New Member

yellow1995Cobra

New Member

OinkAodeOink

Killercanary

The car that set the bar.

onebad95

Sherriff of Bling King County

Killercanary

The car that set the bar.

OinkAodeOink

VIPERn94Five-0

S/CBlack95GT

New Member

Similar threads

Whats new with my car...update

The car that set the bar.

New Member

The car that set the bar.

Active Member

I AM the random post master...bow down

Squint as you approach, lest you be blinded by my

New Member

New Member

The car that set the bar.

Sherriff of Bling King County

The car that set the bar.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency