• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What's wrong with My clutch?

  • Thread starter Thread starter wv109323
  • Start date Start date Nov 14, 2009
W

wv109323

Member
Sep 11, 2008
100
1
18
Lenore ,WV
Nov 14, 2009
#1
  • Nov 14, 2009
  • #1
I bought a theft recovery 92 GT. I put a rebuilt 5.0 motor in it. The clutch/pressure plate in the car had very low miles so I reused it. I have everything in the car ,engine running, but I can not adjust my clutch. The car has an aluminum aftermarket quadrant with a cable adjustable at the clutch fork.
When I adjust the cable so that there is about 1/2" of free play on the clutch pedal, here is what happens. The clutch pedal is almost impossible to push in (at least 60 lbs pressure to push it in and disengage the clutch safety switch) and the clutch will not release. With 2-3" of free play in the clutch pedal the clutch still is very stiff heavy and will not release.
You can not put the car in gear with the engine running. With the car in gear, clutch depressed the car leaps forward when you try to start the car. I thought the clutch was stuck but I could not break it loose.
This is not my first rodeo, I put clutches in a 1965 VW and 1965 Barracuda when they were current.
What could I have done wrong? Anything unique for the Mustang? I used a clutch alignment tool. I torqued everything to spec, no gap between flywheel and pressure plate. Any Ideas? Suggestions?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 14, 2009
#2
  • Nov 14, 2009
  • #2
Does the fork move an appropriate amount for the amount of pedal travel?

Is the cable routed correctly?

If yes to both, it looks like the clutch probably needs to be swapped out. A stolen car probably has the drivetrain beaten up pretty good.
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
699
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
260
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
863
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
231
The Welcome Wagon Aug 21, 2026
Noobz347
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
314
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?