• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

When cruising, or daily driving...what rpms do you shift at?

  • Thread starter Thread starter 90mustangfan
  • Start date Start date Dec 9, 2007
Prev
  • 1
  • 2
First Prev 2 of 2

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Dec 10, 2007
#21
  • Dec 10, 2007
  • #21
Repostyle said:
Is there a purpose to this thread? Don't we all drive pretty much the same way? Shift when it seems right, runnin hard shift later, savin' gas shift sooner.

I think we all shift at about the same rpm no matter what gears because that doesn't effect the rpms, it only changes the speed at which you are going when you get to those same rpms.

I'm not trying to pi$$ on your thread, just trying to figure it out.

Mines an auto so like Ryan218 it depends on how heavy my foot is in it. But even if it was a manual, I would shift when it sounded right, I very rarely look at the tach while I'm driving.
Click to expand...

ZACTLY!

i shift when i want to. sometimes i like to hear it rev, and i cruise at 3000 where it sounds mean, other times i throw it in 5th, and it sits at 1500rpms. lately, since i only get to drive maybe once a week, i like to leave stop lights hard, chirping each gear, then cruising at the speed limit like i wasn't even trying...
 

90mustangfan

New Member
Oct 18, 2005
93
0
0
So cal
Dec 10, 2007
#22
  • Dec 10, 2007
  • #22
Well th reason why I made this post was... I have 4.10s and when Im just crusing and leave it in 4th gear ill be going about 40-43mph at 2300rpms, 45 at 2500rpms...so heres WHY... because I feel sometimes leaving it in 4th and going 45-48mph is alittle high(2500rpms) of a rpm to just be constantly crusing(not sucking gass) at, instead of shifting into 5th gear and the rpms being too low(too doggy for city driving). so why I ask is because 4.10's are right in the spot at city speeds(45-48mph) where 5th is too low(not enough rpms) and 4th is too much rpms, So to solve this and benefit from the acceleration I was thinking of swaping to 4.30 gears that way at 45-50 mph ill be in 5th and and it will be just the right rpms to cruise at 2k-2300rpms in 5th and there wont be that annoying spot when Im cursing and 4th is too much and 5th is too low putting me in the gay drone spot of the rpms right at 1700-1800rpms where drone is the worst in 5th gear at 45mph, so for me it seems 4.30's will solve this problem forcing me into 5th at 45-48mph and will be right at the sweet spot for normal driving. and have hella good acceleration, possibly pulling like a freight train...and I never, but rarely drive on the highway. so 4.30's seem like my next mod for making the car faster...Because at my point theres not many bolt-ons that will do as much as 4.30's will...other than a supercharger or h/c/i. the rest of my bolt-on options wont do crap for my car but mabye like 1-2tenths.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Dec 10, 2007
#23
  • Dec 10, 2007
  • #23
90mustangfan said:
Well th reason why I made this post was... I have 4.10s and when Im just cursing and leave it in 4th gear ill be going about 40-43mph at 2300rpms, 45 at 2500rpms...so heres WHY... because I feel sometimes leaving it in 4th and going 45-48mph is alittle high(2500rpms) of a rpm to just be constantly cursing(not sucking gass) at, instead of shifting into 5th gear and the rpms being too low(too doggy for city driving). so why I ask is because 4.10's are right in the spot at city speeds(45-48mph) where 5th is too low(not enough rpms) and 4th is too much rpms, So to solve this and benefit from the acceleration I was thinking of swaping to 4.30 gears that way at 45-50 mph ill be in 5th and and it will be just the right rpms to cruise at 2k-2300rpms in 5th and there wont be that annoying spot when Im cursing and 4th is too much and 5th is too low putting me in the gay drone spot of the rpms right at 1700-1800rpms where drone is the worst in 5th gear at 45mph, so for me it seems 4.30's will solve this problem forcing me into 5th at 45-48mph and will be right at the sweet spot for normal driving. and have hella good acceleration, possibly pulling like a freight train...and I never, but rarely drive on the highway. so 4.30's seem like my next mod for making the car faster...Because at my point theres not many bolt-ons that will do as much as 4.30's will...other than a supercharger or h/c/i. the rest of my bolt-on options wont do crap for my car but mabye like 1-2tenths.
Click to expand...

heheh. i think somebody has road rage!!!

anyways. you don't need 4:30's. thats way overkill for a street car. especially when you already have 4:10's. it's a waste of your time. save up and do a h/c/i. money much better spent that way!
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Dec 10, 2007
#24
  • Dec 10, 2007
  • #24
Normal driving I'd say I usually shift at about 2800-3000. I can't stand it when people lug the **** out of a good sounding car. When I'm in it, it's a powershift right before the front end noses over. Stock tach indicates 6k but I'd say it's about 5500.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Dec 10, 2007
#25
  • Dec 10, 2007
  • #25
blackened88lx said:
Normal driving I'd say I usually shift at about 2800-3000. I can't stand it when people lug the **** out of a good sounding car. When I'm in it, it's a powershift right before the front end noses over. Stock tach indicates 6k but I'd say it's about 5500.
Click to expand...

You dont know how to power shift.
 

Disturbed90gt

New Member
Jul 25, 2007
0
0
0
portsmouth, va
Dec 10, 2007
#26
  • Dec 10, 2007
  • #26
i shift whenever i feel like it
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Dec 10, 2007
#27
  • Dec 10, 2007
  • #27
bentley429 said:
You dont know how to power shift.
Click to expand...

Yeah, well I just double clutch it, I figure that's pretty much the same thing. At least that's how Vin taught me.

View attachment 342925
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Dec 10, 2007
#28
  • Dec 10, 2007
  • #28
blackened88lx said:
Yeah, well I just double clutch it, I figure that's pretty much the same thing.
Click to expand...

somebody's been watching "the fast and the furious"!!!

nice edit! why not leave it how it was!!!
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 10, 2007
#29
  • Dec 10, 2007
  • #29
shift light set at 6,800 so............. right there no matter what
 

riceslayer302

Banned
Oct 3, 2006
0
1
0
CT
Dec 10, 2007
#30
  • Dec 10, 2007
  • #30
when im daily driving i usually try to shift between 20 and 30,000 RPMs, i get better gas mileage that way
 

woodyy24

New Member
Mar 30, 2005
290
0
0
illinois
Dec 11, 2007
#31
  • Dec 11, 2007
  • #31
riceslayer302 said:
when im daily driving i usually try to shift between 20 and 30,000 RPMs, i get better gas mileage that way
Click to expand...

lol 30,000
 

ill advised

Member
Apr 29, 2003
656
10
19
West L.A.
Dec 11, 2007
#32
  • Dec 11, 2007
  • #32
25thmustang said:
I LOVE the way my car sounds at 2500-3000, so I bring the RPMs to just after that.
Click to expand...
I have gotten really bad with this, especially since switching from the catted X to the off-roader. What's more I tend to hang right there around 3,000 for an extra second or two before shifting. This is in my '90 of course. Such sweet music.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Dec 11, 2007
#33
  • Dec 11, 2007
  • #33
I don't usually powershift it on the street unless theres a reason. Saves the T5 for the a few more years at least! The track, another story .
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Dec 11, 2007
#34
  • Dec 11, 2007
  • #34
man you are lucky with that t5, I put my gtp engine in and it blew after like a week, I powershifted it once and it blew lol......
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Dec 12, 2007
#35
  • Dec 12, 2007
  • #35
Nah we have a GT40P engine with a stock T5 and it launched one T5, but thats it. I think it can be attributed to the clutch, I don't run a hard clutch, just a FMS HD unit. It slips a little but saves the tranny.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
613
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?