Which heads to buy????

Pretty broad topic. You may want to narrow it down a bit- how many #of boost do you want to push through them? What's your HP/ET goal? Any heads will work well with a blower if they are prepped and set up right, including the stock ones. It's all about how much you want to spend, and what you'll be satisfied with. Thumper can port you some stock E7's to really run hard for cheap, relatively speaking. For the money, Trick Flows are hard to beat. If you have enough money, AFR's from Ed Curtis and one of his cams will really put you back in the seat. A Holley Systemmax II kit is supposed to be great for forced induction, and pretty impressive N/A too- but now you're really getting up there in the $.
You didn't specify if you had an upgraded intake yet either- which is essential to building a powerfull H/C/I package, blown or otherwise. Also, another thing to consider is that the best heads for blowers (with the exception of the Trick Flows) will require you to change or flycut your pistons to fit the bigger valves. There is a lot to making a package work "best", and most of it depends on your budget and your intentions.

i have a set of AFR 185 street legals on my vert. I am soon going to be running a good deal of boost through them, but for the time being they are quite nice. i did a before and after dyno and was about 100hp with them and AFR recommends running the Edelbrock RPM intake. Thats my combo and its a killer, can't wait for the boost.

I would say go with the AFR 185's cause later on down the road when you replace the shortblock the 185's will work well with pretty much any stroker or overbore. If you have mass-air or a carb change the cam while your in there. New intake/carb.
Don't forget about the exhaust though.

Blowers seem like alot of work to do them right. You want low compression dommed pistons, and the camshaft decision is ideal.

No one likes the edelbrock aluminum heads? I am in the processing of also buying heads. I plan on running a stage one tf cam with edelbrock heads. No intake besides the stock one for now.

Your wasting your time with the stock intake.