• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Which transmission?

  • Thread starter Thread starter 98BLKGT
  • Start date Start date Mar 19, 2007

98BLKGT

Founding Member
Dec 23, 2001
322
1
0
Chicago area
Mar 19, 2007
#1
  • Mar 19, 2007
  • #1
Should I go with:
Rebuilt T-5's 79-93 3.35 Super Alloy gearset, carbon fiber blockers, steel bearing retainer $999

or

* Heavy-duty "World Class" T-5 5-speed manual transmission with short-throw shifter.
* 330 ft./lbs. torque capacity.
* Double-moly 2nd speed, 3rd speed and countershaft cluster gears.
* Carbon-fiber 3-4 blocker rings.
* Improved synchronizers and bearings.
* 1-1/16 in. diameter 10-tooth input spline.
* 28-tooth output spline.
* 7-tooth speedometer drive gear.
* Cobra-style pocket bearing.
* Steel input bearing retainer. $1295

OR

Rebuild for $425+225parts(summit)=$650
Gears would stay stock

I take it both of these are just ready to drop in and go? The car has 300-350HP.
93 Notch with stock t-5 right now with a bad 2nd synchro. On a budget.

Both of these are HERE
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Mar 19, 2007
#2
  • Mar 19, 2007
  • #2
my choice would be neither of the above...tremec tko500 would be my choice...costs a little more but well worth it...i have no tranny worries and i can upgrade without worring about mt tranny holding up...my 2 cents..


 

Attachments

  • tko500tranny003.webp
    43.4 KB · Views: 129
  • tremectransmission003.webp
    38.7 KB · Views: 146

Nibbie

New Member
Mar 10, 2007
127
0
0
Mar 19, 2007
#3
  • Mar 19, 2007
  • #3
I would say the same thing, get a tko- you wouldnt have to realy worry about breakage issues. or you can get a T-56 instead /w with a D&D t-56 swap kit. thats just my 2 cents.
 

98BLKGT

Founding Member
Dec 23, 2001
322
1
0
Chicago area
Mar 19, 2007
#4
  • Mar 19, 2007
  • #4

Funds won't allow. So now what? I thinks its just a bad synchro on the current trans.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Mar 19, 2007
#5
  • Mar 19, 2007
  • #5
If i had to choose between what you have listed I would go with option #2 the world class t-5. I would think that a TKO-500 or TKO-600 would be a better choice. I have done the t-5 thing and i'm on tranny 6 now. With what I have spent on old junker's I could have done the job right the first time.
 

98BLKGT

Founding Member
Dec 23, 2001
322
1
0
Chicago area
Mar 20, 2007
#6
  • Mar 20, 2007
  • #6
86bluecobra said:
If i had to choose between what you have listed I would go with option #2 the world class t-5. I would think that a TKO-500 or TKO-600 would be a better choice. I have done the t-5 thing and i'm on tranny 6 now. With what I have spent on old junker's I could have done the job right the first time.
Click to expand...
Yeah but you're in to mid 11s right? I should also mention couple other things that the trans. life depends on.
-I won't run slicks.
-Only a 3.27 gear for a while
-Nothing more then a stage one or two clutch
-No quicker then mid 12's
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Mar 20, 2007
#7
  • Mar 20, 2007
  • #7
If you are going to stick with the T5, just keep it cheap. Get the most basic rebuild you can get away with because chances are its gonna break down the line. Second gear syncro could be the case but for me I banged up the 1st to 2nd slider gear pretty bad where the dog teath were flatened out on the tip. That was 80 bucks right there for the slider and 2nd gear. Also check for cracked shift forks too... found a crack in my 3-4th shift fork. Tear it apart and then see what you need to replace would be my suggestion before buying a kit which might not fix the issue. I swear my MGW was the death of my T5... the first time.
Kevin
Kevin
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 20, 2007
#8
  • Mar 20, 2007
  • #8
Option number 1 or 3 if you're dead set on staying with a T5. You already have a WC T5 in your car now, option number 1 is also a world class, and so is number 2. Your cheapest bet is just picking up the video from Hanlon, grabbing a basic cheapo rebuild kit from either Hanlon or D&D, and going to town on it.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Mar 20, 2007
#9
  • Mar 20, 2007
  • #9
StangGT1995 said:
Option number 1 or 3 if you're dead set on staying with a T5. You already have a WC T5 in your car now, option number 1 is also a world class, and so is number 2. Your cheapest bet is just picking up the video from Hanlon, grabbing a basic cheapo rebuild kit from either Hanlon or D&D, and going to town on it.
Click to expand...



Plus you'll get the added benefit of knowing how to replace 3rd gear and the countershaft if you ever decide to up the power.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Mar 20, 2007
#10
  • Mar 20, 2007
  • #10
With a budget, I would go with number one or number three. The T-5 will handle a little more than stock. 350HP shouldn't hurt.

The number one thing that kills transmissions is abuse. Missing shifts, powershifting, dumping the clutch at high RPM's...all of these things will bring a T-5 to an early retirement.

I had a 95 GT with H/C/I P-600B PRocharger and 3-core intercooler. CFDX clutch and a STOCK T-5....I went down the track 50-60 times and drove this car to work daily, with a lot of street racing. This trans was great, but I didn't abuse it. I had two other Mustangs with T-5's and they were great.

However, if you had more money to spend and plan on doing serious power adders in the future, go with something suggested above.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Mar 20, 2007
#11
  • Mar 20, 2007
  • #11
SVT32VDOHC said:
With a budget, I would go with number one or number three. The T-5 will handle a little more than stock. 350HP shouldn't hurt.

The number one thing that kills transmissions is abuse. Missing shifts, powershifting, dumping the clutch at high RPM's...all of these things will bring a T-5 to an early retirement.

I had a 95 GT with H/C/I P-600B PRocharger and 3-core intercooler. CFDX clutch and a STOCK T-5....I went down the track 50-60 times and drove this car to work daily, with a lot of street racing. This trans was great, but I didn't abuse it. I had two other Mustangs with T-5's and they were great.

However, if you had more money to spend and plan on doing serious power adders in the future, go with something suggested above.
Click to expand...

Although abuse certainly will contribute to the demise of the t-5….it seems to be the design of the tranny itself that is it's weakness. You can baby the tranny throughout it's whole life and still shear the teeth off of 3rd gear with simply to much torque (as was the case with mine). There seem to be guys out there that grenade their t-5 with 350lbs/ft of torque while others beat the piss out theirs with 600lbs/ft and claim they are indestructible. In the end….as SVT32VDOHC stated, if your planning on upping the power in the near future you'd be better off selling the t-5 and picking up something more capable.
 

98BLKGT

Founding Member
Dec 23, 2001
322
1
0
Chicago area
Mar 20, 2007
#12
  • Mar 20, 2007
  • #12
Someone said that I already have a WC T-5, but there are manny different types of them.
Common ask questions:
Q. What is a world class transmission ?
A. All t-5 1985-2001 are considered "world class" there are aprox. 40 different models of world class.
Q. What are the main differences of the world class transmission's ?
A. 1985-1989 are the weaker models of world class, in 1990 Borg Warner upgraded the 2nd & 3rd and cluster. The result was a tourque rating increase from 265 ft. lbs to 300 ft. lbs.

The one above is rated at 330 ft. lbs.
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
587
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
903
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
993
Drivetrain Parts Sep 7, 2026
AeroCoupe
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?