• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

whistle on newly installed accufab tb?

  • Thread starter Thread starter 01mgvert
  • Start date Start date Mar 19, 2004
  • 1
  • 2
Next
1 of 2 Next Last
0

01mgvert

New Member
Jan 12, 2004
302
0
0
Mar 19, 2004
#1
  • Mar 19, 2004
  • #1
I just installed the Accufab throttle body along with the Dragon plenum. Installation went well. The car runs great (more responsive) except for a whistling sound when I first accelerate. It sounds kind of like the squeeling of a slipping belt. Will this sound go away with usage? Or do I need to fix something? Any suggestions?
 

Blev

New Member
Aug 17, 2003
1,295
1
0
So. Cal. V-Town
Mar 19, 2004
#2
  • Mar 19, 2004
  • #2
01mgvert said:
I just installed the Accufab throttle body along with the Dragon plenum. Installation went well. The car runs great (more responsive) except for a whistling sound when I first accelerate. It sounds kind of like the squeeling of a slipping belt. Will this sound go away with usage? Or do I need to fix something? Any suggestions?
Click to expand...
I have seen alot of threads talking about the "whistle" you get from it. Not sure about the break in part, but I know your not the only one with the issue. Didn't see anything about a fix though. Do a search and see what you come up with!
 

red98_gt

New Member
Mar 15, 2004
69
0
0
Mar 19, 2004
#3
  • Mar 19, 2004
  • #3
I have a cold air and TB, and mine whistles as well....your not gonna get rid of it, mine has dont it for about 2 months now! I kinda like the sound...and it does seperate you from others who dont have other induction mods! ;-)
 

nickthegenius

Active Member
Dec 23, 2002
1,631
1
38
Elwood, IN
Mar 19, 2004
#4
  • Mar 19, 2004
  • #4
Mine whistled with just the Accufab TB and C&L plenum. Then I added my Steeda Cold Air kit and its even louder, but it only does it taking off or if you are running a constant speed and tap the gas a bit.
 

wms004

Founding Member
Jan 15, 2002
2,864
2
49
Los Angeles
Mar 19, 2004
#5
  • Mar 19, 2004
  • #5
01mgvert said:
I just installed the Accufab throttle body along with the Dragon plenum. Installation went well. The car runs great (more responsive) except for a whistling sound when I first accelerate. It sounds kind of like the squeeling of a slipping belt. Will this sound go away with usage? Or do I need to fix something? Any suggestions?
Click to expand...
I have a dragon and accufab 75mm.. I can hear a somewhat faint whistle when accelerating mostly below 2000 rpm, but it isn't that loud or annoying. Check for vacuum leaks and that everything is fairly tight.. did you clamp the stock intake over the t/b well?

-wade
 
0

01mgvert

New Member
Jan 12, 2004
302
0
0
Mar 19, 2004
#6
  • Mar 19, 2004
  • #6
wms004 said:
I have a dragon and accufab 75mm.. I can hear a somewhat faint whistle when accelerating mostly below 2000 rpm, but it isn't that loud or annoying. Check for vacuum leaks and that everything is fairly tight.. did you clamp the stock intake over the t/b well?

-wade
Click to expand...

I re-checked all the hose connections. Everything is tight. I notified Dragon Perfromance Parts about the problem. They said that many customers had the same experience and that there is nothing to worry about. Still, the sound is annoying.
 

03trubluGT

New Member
Nov 19, 2002
1,067
0
0
Mansfield, TX
Mar 19, 2004
#7
  • Mar 19, 2004
  • #7
It's the vein in the Dragon plenum.

Both Dragons I tested did the same thing.

On the second test, I had 2 guys say "hey, you didn't tighten something"... I checked and everything was tight. I then leaned over the car and gave it some manual throttle, and you can tell that the whistling is coming straight from the plenum. You can even put your hand on it and "feel" the whistleing.

Sounds like a mini blower.


Matt
 
C

CottonBurnerz

Banned
May 10, 2003
1,554
0
0
Drink and Drive = Teh Lose
Mar 19, 2004
#8
  • Mar 19, 2004
  • #8
03trubluGT said:
It's the vein in the Dragon plenum.

Both Dragons I tested did the same thing.

On the second test, I had 2 guys say "hey, you didn't tighten something"... I checked and everything was tight. I then leaned over the car and gave it some manual throttle, and you can tell that the whistling is coming straight from the plenum. You can even put your hand on it and "feel" the whistleing.

Sounds like a mini blower.


Matt
Click to expand...

=\ you forgot about us already? We (me and dallasgt01) were the 2 boneheads that know nothing about cars and was just trying to help...
 

Signal_12

The artist formerly known as SN95Mike
Founding Member
Jul 16, 1999
1,459
0
0
Central FL
Mar 19, 2004
#9
  • Mar 19, 2004
  • #9
The whistle is the insane amount of air moving through your motor. Either keep it on and keep the hp gains or take it off and be slow.

This type of thread reminds me of Mustang owners who complain about gas milage after installing a blower

Later.

Mike
 
0

01mgvert

New Member
Jan 12, 2004
302
0
0
Mar 19, 2004
#10
  • Mar 19, 2004
  • #10
Signal_12 said:
The whistle is the insane amount of air moving through your motor. Either keep it on and keep the hp gains or take it off and be slow.

This type of thread reminds me of Mustang owners who complain about gas milage after installing a blower

Later.

Mike
Click to expand...

How about I exchange the Dragon for a Accufab or C & L Plenum that offer the same horsepower gains without the annoying noise?

Thanks for the advice anyways
 
H

Highroller

Founding Member
Oct 18, 2002
320
0
0
Vegas
Mar 19, 2004
#11
  • Mar 19, 2004
  • #11
nickthegenius said:
Mine whistled with just the Accufab TB and C&L plenum. Then I added my Steeda Cold Air kit and its even louder, but it only does it taking off or if you are running a constant speed and tap the gas a bit.
Click to expand...

Looks like C&L guys have it too

Owell, I have the same whistling!! what can I do
 

robg860

New Member
Mar 2, 2004
117
0
0
Mar 20, 2004
#12
  • Mar 20, 2004
  • #12
Why didnt you get the accufab plenum. My friends car had the exact same problem you have and he HATED it after a few months. It will not break in or go away. Its like the terminator.....it will never quit....ever! Send it back and get the Accufab. They fixed theirs by providing a smoother finish on the inside. The others are rougher and the air velocity causes a terrible annoying whistle. Sell your plenum on ebay, or take it to work and use it for a paperweight. They are far less annoying as paperweights. Im sure some people lovem, but most will whistle!
 

JonJon

Founding Member
Aug 16, 2002
4,801
1
68
back in Marylands
Mar 20, 2004
#13
  • Mar 20, 2004
  • #13
i don't notice anything
 

wms004

Founding Member
Jan 15, 2002
2,864
2
49
Los Angeles
Mar 20, 2004
#14
  • Mar 20, 2004
  • #14
03trubluGT said:
It's the vein in the Dragon plenum.

Both Dragons I tested did the same thing.

On the second test, I had 2 guys say "hey, you didn't tighten something"... I checked and everything was tight. I then leaned over the car and gave it some manual throttle, and you can tell that the whistling is coming straight from the plenum. You can even put your hand on it and "feel" the whistleing.

Sounds like a mini blower.


Matt
Click to expand...
yeah, almost sounds like a quiet little turbo, but like i said, mine is by no means loud or in any way annoying.. i like hearing it.. I know theres plenty of air flowin thru there
 
T

turbokid

New Member
Feb 7, 2004
113
0
0
Mar 20, 2004
#15
  • Mar 20, 2004
  • #15
yeah mine does dat too witha 70mm tb on stock plenum...... im getting the accufab soon.... hope the whistling doesnt become louder after the install...
 

03poontanggt

New Member
Feb 23, 2004
296
0
0
fresno ca
Mar 20, 2004
#16
  • Mar 20, 2004
  • #16
i have a ported plenum and cold air and the whistling i get sounds cool
 

4.6_02_Black_GT

Founding Member
Jul 26, 2002
622
1
0
Charlotte NC
Jul 5, 2004
#17
  • Jul 5, 2004
  • #17
Hey guys as discussed above....I only notice the whistle when you just touch the throttle...not really noticable unless you are listening for it.

I spent 30min checking lines the connectors after the install..then I remembered this thread. sounds kinda cool..it only last for just a second.
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Jul 5, 2004
#18
  • Jul 5, 2004
  • #18
I don't have a whistle on either GT - my 02 with the Accufab or my wife's 01 with my old plenum, now port and polished. Just some whooshing of air, but not a whistle.
But I do get a whistle from something under the hood on my 02 after it warmed up, only at idle, with the A/C off. If you turn the A/C on, which brings the idle up just a bit, it goes away. And if you touch the throttle at all, it goes away. I don' think it's related to the plenum however...
 

neoclasiccl

Founding Member
Jun 1, 2002
3,043
0
57
Help I can't see !!!!!!
Jul 5, 2004
#19
  • Jul 5, 2004
  • #19
Mine does it badly at idle and at part throttle. I have gotten used to it.
 

Venom_Nitrous

Founding Member
Aug 23, 2002
416
1
0
Spearfish, SD
Jul 5, 2004
#20
  • Jul 5, 2004
  • #20
Mine whistles and I have a BBK 75mm and Mac CAI with stock plenum. My brother has a 70mm BBK and a CAI and he hated the whistle so we compared the stock and BBK unit and noticed the stock had a hole in it maybe 1 mm in dia., so we drilled a hole just like it in his BBK. No more whistle, idled better too. I like the whistle, sounds cool?maybe I am stupid or different?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
569
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
P
Loud awful sound
  • Pspangler37
  • Jul 30, 2023
  • 1994 - 1995 Specific Tech
Replies
4
Views
1K
1994 - 1995 Specific Tech Jul 31, 2023
Pspangler37
P
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
TB Injection Install (Aces Killshot)
  • LILCBRA
  • Feb 5, 2024
  • 1974 - 1978 Mustang II Talk & Tech
  • 4 5 6
Replies
119
Views
21K
1974 - 1978 Mustang II Talk & Tech Dec 1, 2024
LILCBRA
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?