Will these mods give me 30 RWHP or is it BS?

S

spederman

Member

Apr 13, 2005

732

0

16

Apr 26, 2005

#1

• Apr 26, 2005

• #1

I am trying to hit about 300 rwhp and see if I can get to 13.0 or less 1/4 mile while staying N/A. My mods right now are bassani x pipe, borla exhaust, underdrive pulleys, racecraft suspension, subframe connectors, hurst short shifter, 3:55 gears.

Will these two items give me about 30 HP together like some of these websites claim or is it all BS.

Accufab 70mm TB/ Plenum combo
Densecharger CAI.

After I get these two I will get a dyno tune. Do you think I can hit my goal with this?

 

squares98

Member

Aug 20, 2004

852

0

17

Orange,ca

Apr 26, 2005

#2

• Apr 26, 2005

• #2

my guess is 15rwhp tops. You will be about 30-40rwhp short of 300 with those mods(my guess again)

 

2

2001sleeper

New Member

Nov 22, 2004

136

0

0

Apr 26, 2005

#3

• Apr 26, 2005

• #3

going to need aggressive cams and a p/p to get in the 300rwhp area

 

streetstang03

unModerator

Dec 27, 2003

0

1

0

the dark side of the moon/home of the 1999, 2003,

Apr 26, 2005

#4

• Apr 26, 2005

• #4

i definetly dont think so. get some cams, long tube headers, tune, drag radials and do some weight reduction and you'll see a lot quicker times.

 

gibson89LX

Founding Member

Jan 28, 2002

1,934

1

36

42

Brunswick, OH

myspace.com

Apr 26, 2005

#5

• Apr 26, 2005

• #5

Do you think that I'm at 300? I'd probably think so...at least bhp-wise.

 

Mirrahasmycar

New Member

Apr 2, 2005

210

0

0

CT

www.cardomain.com

Apr 26, 2005

#6

• Apr 26, 2005

• #6

thats a tough question, maybe

 

hotmustang331

Active Member

Apr 29, 2004

2,967

3

48

Bastrop,TX

Apr 26, 2005

#7

• Apr 26, 2005

• #7

Thats what I figure, im at about 300-310 at the crank...260s to the wheels...need a dyno.

 

J

jeffstanggt04

New Member

Apr 1, 2005

71

0

0

42

Apr 26, 2005

#8

• Apr 26, 2005

• #8

i just dynoed my car today i made 258rwhp and 299 rwtq, it was getting better on every pull i only did three pulls. here is my mods 04 Torch Red GT, BBK CAI, BBK 75mm tb, Trick Flow UIP, March Pulleys, Bassani O/R X pipe, Borla Cat Back, Ford Racing Aluminum Driveshaft, 4.10 Gears, Diablo Sport Dyno Tuned Delta Chip, Steeda Tri-ax shifter, so 300 rwhp uh no. i dont see how folks that have the same mods as me are claiming 275-285 or so hp at the wheels, i have everything except heads cams and headers or so i think

 

C

codered97

New Member

Mar 30, 2005

34

0

0

Apr 26, 2005

#9

• Apr 26, 2005

• #9

I have had friends gain over 22 rwhp with cams so if you add that to yours you would be right there

 

S

spederman

Member

Apr 13, 2005

732

0

16

Apr 26, 2005

#10

• Apr 26, 2005

• #10

Man, this sucks, I cant believe it takes soooo much to get to 300 rwhp N/A. I thought it would be a lot easier getting there. Oh well.

Jeffstang, what are you running for 1/4 miles times?

 

T

tooblue02

New Member

May 10, 2004

86

0

0

46

Groton Connecticut

Apr 26, 2005

#11

• Apr 26, 2005

• #11

spederman said:

Man, this sucks, I cant believe it takes soooo much to get to 300 rwhp N/A. I thought it would be a lot easier getting there. Oh well.

Jeffstang, what are you running for 1/4 miles times?

Click to expand...

300 N/A is easy (Nitrous/Assisted)

Also to run 12's N/A you don't need 300 rwhp, get a decent drag suspension, 4.30's and some slicks, and a tune.

3.55 gears on N/A mustang

 

J

jeffstanggt04

New Member

Apr 1, 2005

71

0

0

42

Apr 26, 2005

#12

• Apr 26, 2005

• #12

i havent ran in the quarter but here is my best 1/8 mile time and i was spinning bad dont let the 60 foot time fool u lol
reaction .686
60ft 1.993
330ft
594 8.114
1/8th 8.665
81.80 mph
on bald goodyears i managed to pull out a good 60 but it spun at towards the end, i had to roll thru first, pushing no rpms off the line, spun 20 in second, and a few feet in third granny shifting the whole time, i got the nitto drs on now so i will be hooking now

 

J

jeffstanggt04

New Member

Apr 1, 2005

71

0

0

42

Apr 26, 2005

#13

• Apr 26, 2005

• #13

i hope to bust some 8.2s or 8.3s thursday

 

csledd

Official Ovary Punching Member

Founding Member

Aug 18, 2001

1,115

1

0

41

Paducah, KY

www.cardomain.com

Apr 26, 2005

#14

• Apr 26, 2005

• #14

I'm getting a dyno on my car at the end of june after I get a tune.. I'm trying to think in my head my numbers are low so I won't be so disappointed. I'm guessing 260 to the wheels at the most

 

B

BLUE03GT

New Member

Jul 13, 2003

281

0

0

43

Sunnyvale, Ca.

Apr 26, 2005

#15

• Apr 26, 2005

• #15

You are probably looking at 260rwhp right now... i say... get the plenum and cai you are talking about + some long tube headers, drag radials, and a good tune... and u should see 280rwhp N/A and maybe 13.0-13.2's.... or better yet get Cams as well... and u should definately see 300rwhp with a decent tune... u should be in the high 12's with cams and all the bolt-ons...

 

JonJon

Founding Member

Aug 16, 2002

4,801

1

68

back in Marylands

coldgravity.com

Apr 26, 2005

#16

• Apr 26, 2005

• #16

255rwhp SAE
c&l 80mm maf, accufab 75mm tb, c&l intake plenum, steeda underdrive pulleys, magnaflow catted x and magnapacks catback

 

hotmustang331

Active Member

Apr 29, 2004

2,967

3

48

Bastrop,TX

Apr 26, 2005

#17

• Apr 26, 2005

• #17

jeffstanggt04 said:

i just dynoed my car today i made 258rwhp and 299 rwtq, it was getting better on every pull i only did three pulls. here is my mods 04 Torch Red GT, BBK CAI, BBK 75mm tb, Trick Flow UIP, March Pulleys, Bassani O/R X pipe, Borla Cat Back, Ford Racing Aluminum Driveshaft, 4.10 Gears, Diablo Sport Dyno Tuned Delta Chip, Steeda Tri-ax shifter, so 300 rwhp uh no. i dont see how folks that have the same mods as me are claiming 275-285 or so hp at the wheels, i have everything except heads cams and headers or so i think

Click to expand...

Those 4.10s rob about 7-10 RWHP on teh dyno. Notice the guys who pull their car in 3rd then pull in 4th, 3rd makes a good 7RWHP less. Otherwise you would be well into the 260s. You should make a few more HP than my car..well now that I look we are about even.