windsor jr. heads

[cbarr300]

Anyone know how good these heads are? How about with a minor port and polish?

they have 180cc runners and a 58cc combustion chamber. the springs are dual 125# springs at 1.437"
The valves are 1.94 intake and 1.6 exhaust

thanks

 

[ProKiller]

i think they are pretty small. from the 94-95 FAQ:
Lift ******** Intake ****** Exhaust
.100 ******* 54 ****** 47
.200 ******* 105 ****** 101
.300 ******* 141 ****** 125
.400 * ****** 170 ****** 140
.500 ******* 186 ****** 148
Avg Flow **** 131.2 **** 112.2
I/E Ratio **** 85.5%
Overstock *** 115.9% *** 132.9%

 

[S351Saleen77]

Pro killer,
I think they flow better than what you are saying. Where did you get the info?

Here is a link to a head compare....it is with the older 171cc intake ports not the new 180's. They flowed 202cfm on the intake. The new 180's would flow better.

http://www.mindspring.com/~steveflyer/heads.htm


cbarr300,
If you get a good deal on them they would be o.k. for a 302. I see in your sig you want a stroker. I would not use these on a stroker.

I wouldn't buy them unless I got a great deal.

 

[cbarr300]

That's on a different motor. I'm saving up for a dart based stroker...but til then I'm running my 302 on those heads (ported), a blower cam (but pretty good n/a), and my cobra intake with a port and polish.

Got the heads for free so I figured I might as well use them.

I looked at the faq in the tech section...but those numbers just don't seem right. I've seen other sources that say different....maybe I should just call World products lol.

Thanks..any more info would be great

 

[ProKiller]

i meant they would be too small for the 427 build that i thought he was getting them for.

 

[cbarr300]

haha, gotcha. I've gotta put the current combo in my sig. sorry about that