• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

X-pipe and mufflers installed.....disappointed

  • Thread starter Thread starter Vinnietbird
  • Start date Start date Jul 31, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Vinnietbird

Member
Jun 2, 2005
584
3
19
Jul 31, 2006
#1
  • Jul 31, 2006
  • #1
I installed my off road x-pipe and a set of Warlock mufflers with the built in cut-outs.I did have regular old turbo mufflers and the factory h-pipe with the 4 cats hollwed out.The car is quieter now than it was before.I was hoping for a rumble.It sounds fair when you mash the throttle hard,but I expected more.I also upgraded to 2 1/2 inch pipes.Oh well,Like them or not,they'll stay until the need changed again.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jul 31, 2006
#2
  • Jul 31, 2006
  • #2
Sounds like you need more motor now.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Jul 31, 2006
#3
  • Jul 31, 2006
  • #3
I have ported and polished E-7 heads going on in a week or so.I have the heads,now I need the time.They'll be much better than the stock '86 E-6 heads.Anything would be better than those E-6 heads.It's running very strong,but there's always room for more power.
 

woodyy24

New Member
Mar 30, 2005
290
0
0
illinois
Jul 31, 2006
#4
  • Jul 31, 2006
  • #4
the heads will change the tone a bit
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jul 31, 2006
#5
  • Jul 31, 2006
  • #5
Good flowing heads + a good cam will change the sound of the car like night and day. The difference when I did h/c/i in sound from stock with off road x was more than going from stock H to off road x.

I can send you video if you want.
 

Killer50stang

New Member
May 11, 2004
632
0
0
Jul 31, 2006
#6
  • Jul 31, 2006
  • #6
Mine did this at first, until the mufflers got burned in a little, then it got louder. Walock? I went with the famous 2-chamber flowmasters and it sounds amazing.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Jul 31, 2006
#7
  • Jul 31, 2006
  • #7
Aliate X,please send it.I'm very limited to cam choices due to my flat tops.I'm hoping that the stock '86 cam will work well with these ported heads.Any ideas?I appreciate the help everyone.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Jul 31, 2006
#8
  • Jul 31, 2006
  • #8
I had Warlocks on the '83 for a couple years. They are very quiet when they are capped. Not loud enough at all. If you want loud, then uncap them I went to 2 chamber Flows also, which made a huge difference. Much louder all around
 

carbed87

Member
Jun 5, 2005
215
0
16
Jul 31, 2006
#9
  • Jul 31, 2006
  • #9
god i hate warlocks. my buddie (864:10c4) matt had those on his 86 gt, and imo they sounded horrible.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jul 31, 2006
#10
  • Jul 31, 2006
  • #10
If you want a good quality sound, then get some borlas. If you want just all out loud get flows...(id never put a set of flows on any car)
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Jul 31, 2006
#11
  • Jul 31, 2006
  • #11
I really don't want "loud",But a nice deep tone.I should've got Borla mufflers.My friend has them on his Ford truck and they are great.Oh well,they stay for now,my money is now obligated to getting the gaskets and fluids I need to swap my heads.I'll uncap the warlocks and see what they sound like.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Aug 1, 2006
#12
  • Aug 1, 2006
  • #12
Flows are considered all out loud now? I went from flows to Mac and it got louder. Then went to Spintech and got even louder. Unless you mean 1 chamber flows, Id say they wont be the loudest...

My dad added Hooker Max Flow mufflers, which you can see through, no chambers. We expected it to be really loud, and the car was quieter than the Macs he had before. Your best bet is to go out and find the right exhaust you like the sound of at shows, or events. Ask around and see what you prefer!
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Aug 1, 2006
#13
  • Aug 1, 2006
  • #13
I agree with 25th, 2 chamber flowmaster is not loud.

Dont warlocks flow good though?

Hey 25th, just with deleting the a/c running a 74.5" shortbelt, and highflowing mufflers from flowmasters, i picked up 2mph in the 1/4 mile.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Aug 1, 2006
#14
  • Aug 1, 2006
  • #14
Getting rid of the AC helps parasitic loss (some) and the mufflers Im sure helped a little. If the conditions were the same I could see gaining some. Personally I never saw a bigger gain than my exhaust, but I think there was more to it than what I saw!
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Aug 1, 2006
#15
  • Aug 1, 2006
  • #15
Vinnietbird said:
I really don't want "loud",But a nice deep tone.I should've got Borla mufflers.My friend has them on his Ford truck and they are great.Oh well,they stay for now,my money is now obligated to getting the gaskets and fluids I need to swap my heads.I'll uncap the warlocks and see what they sound like.
Click to expand...

Borlas have a very deep tone, with the cam it sounds awesome.

I dunno flows are pretty loud, the 2 chambers and such arnt that loud, but it seems when you star tpushing some power, they get a really nasty tinny sound.

I agree spintechs are almost like open headers, its like if someone wants their car to be so loud, why not just run it open headers?
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Aug 1, 2006
#16
  • Aug 1, 2006
  • #16
There is a difference between loud and annoying and loud and good. I ran open headers for a bit before I got my exhaust in (by ran I mean moved the car from the garage to the driveway to work on it) and although it was loud, it didnt sound all that great. I added the exhaust I have now (LTs, o/r X and spintechs) and although still loud it has a raspy pissed off sound that I love.

Just making a car loud is one thing, making it sound good and loud is another. Personally I would say check into Bassani, or Borla if you have money!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Aug 1, 2006
#17
  • Aug 1, 2006
  • #17
mob said:
I agree with 25th, 2 chamber flowmaster is not loud.

Dont warlocks flow good though?

Hey 25th, just with deleting the a/c running a 74.5" shortbelt, and highflowing mufflers from flowmasters, i picked up 2mph in the 1/4 mile.
Click to expand...

I have a Bassani Cat X Pipe with 2 Chambered Flows Cat Back and while my car sounds really good, its just missing not being quite loud enough.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Aug 1, 2006
#18
  • Aug 1, 2006
  • #18
give it 300 miles or so. we had them on my old t-bird and it just takes a little time. IMO the warlock sounds very good when you step on it from a red light
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Aug 1, 2006
#19
  • Aug 1, 2006
  • #19
I'll give it time,I'm patient.I did delete the A/C and smog,and I am running the 73.5 inch belt.I'm really wondering how much power the ported E-7 heads will give over the stock E-6 '86 heads.The E-7 heads also have beehive springs and different valves.Don't know what size,they were all done before I bought them.The machine shop said they will work with my flat top pistons.That was my biggest concern.He said don't push it over 6000 rpms.I told him that for now,that wasn't anything I needed to worry about.He also said that with those springs and heads,my throttle response was going to be wicked.I hope he's right.I really like this Thunderbird.I wanted a Stang,but after I drove this '88 (19 years ago),I fell in love.It's 3200 pounds and feels great,plus,anything that go on a Fox Stang fits my car,except the driveshaft,aand the exhaust needs to be about 6 inches longer in the middle.Great car to surprise ricers with.
 

Killer50stang

New Member
May 11, 2004
632
0
0
Aug 1, 2006
#20
  • Aug 1, 2006
  • #20
PoopDawg said:
I had Warlocks on the '83 for a couple years. They are very quiet when they are capped. Not loud enough at all. If you want loud, then uncap them I went to 2 chamber Flows also, which made a huge difference. Much louder all around
Click to expand...

Maybe this is why I've never head of them. If you guys really think 2 chambers aren't loud, you're crazy. Of course, if you have CATS, then that makes a huge difference. My stuff is all off road and you can hear me coming miles away.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
H
'86 New Turbo Build First Start/Idle Trouble. Full Tune specs attached
  • Heffay
  • Jul 10, 2022
  • Digital Self-tuning Forum
Replies
8
Views
3K
Digital Self-tuning Forum Jul 12, 2022
Heffay
H
E
For Sale 1989 LX Notch 410ci 85mm turbo 8 pt cage 9" rear end
  • EightyNineFive
  • Aug 22, 2021
  • Fox Body Mustangs For Sale (1979-93)
Replies
1
Views
4K
Fox Body Mustangs For Sale (1979-93) Jun 18, 2022
Freakinstang
F
On3 Performance Install Tips
  • flstang65
  • Dec 15, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
11K
1996 - 2004 SN95 Mustang -General/Talk- Mar 17, 2023
atomicfox236
A
Progress Thread 2005 Mustang GT Build (Pics/Questions)
  • reapxr
  • May 6, 2019
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
3K
2005 - 2014 S-197 Mustang -General/Talk- May 6, 2019
reapxr
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?