Ok, I hear this all the time,"type in 4 cyl swap/conversion and look for all the posts on here" I do that and I get the threads, click on them, and see,"type in 4 cyl swap/conversion and look for all the posts on here". Does anyone actually know a website for this or know first hand! I mostly looking for stuff regarding wiring. My donor car is a 89 GT with mass air flow going into a 4cyl. Do I still need to do a MAF conversion? I am taking everything out of the gt. So it will have all the MAF wiriing on the motor already but I read there was something under the drivers seat that needed to be spliced into for the fuel pupm but I wasnt sure if that was b/c it had something to do with the speed density wiring. It is a complete car just has paper work issues that cant be solved! Also, the front suspension. Can it come out in one piece? k/member rack and pinion, wheels, brakes, springs,shocks as all one unit??? or easier to ust take it apart. I pretty much have everything else set. oh, how long did it take to do this conversion. I am going to have about a week with maybe one other person to help me? any suggestions on where to start? to save for last? I was going to start at the rear end and work my way up to the front...
thanks in advance
thanks in advance