• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Your 1/4 times BONE STOCK

  • Thread starter Thread starter mustangn00b
  • Start date Start date Mar 17, 2006
M

mustangn00b

New Member
Feb 16, 2006
17
0
0
Mar 17, 2006
#1
  • Mar 17, 2006
  • #1
Hey guys, i was just wondering... i was reading some sites about the 05-06 GT, great looking car by the way.. they were saying like mid to high 13's it runs? What was your time when you ran your car FACTORY STOCK on a 1/4 track. Also tell me if it was a manual or automatic. THAAANKKS!!

(how fast 0-60 if you would like to add to )
 

smokedu1

New Member
Feb 3, 2004
28
0
0
Mar 18, 2006
#2
  • Mar 18, 2006
  • #2
Ok I'll start. I think I posted this information already in a differernt forum, but..Wifes 06 GT most of the bells and whistles, woofer, side air bags ect. Automatic transmission, two runs on a very green and cold track (2/12/06).
13.93@99 and a 13.83@99 FWIW I was very impressed compared to my 87GT speed density 5 speed that was much lighter ran a 14.8 completly stock.
Derick
 
T

thump_rrr

New Member
Nov 25, 2004
220
0
0
Montreal, Canada
Mar 18, 2006
#3
  • Mar 18, 2006
  • #3
13.65 @ 101mph with 180 miles on a 3 day old car.
I subsequently ran a 13.55 4 months later but I had Steeda Sway Bars and a Steeda 3rd link in the car.
 
M

mustangn00b

New Member
Feb 16, 2006
17
0
0
Mar 18, 2006
#4
  • Mar 18, 2006
  • #4
^ VERY NICE.. really impressed. anybody else?
 
L

LarryS

Mar 18, 2006
#5
  • Mar 18, 2006
  • #5
13.42 @ 101.80 mph but with just an ASP underdrive pulley. 2.011 60'.
 
M

mustangn00b

New Member
Feb 16, 2006
17
0
0
Mar 18, 2006
#6
  • Mar 18, 2006
  • #6
with just a pulley???? lol that's insane how much you pay for it?
 
S

SFLDragon

New Member
Dec 27, 2004
41
0
0
Mar 18, 2006
#7
  • Mar 18, 2006
  • #7
a good friend went 13.9 @ 99 STONE stock
 
L

LarryS

Mar 18, 2006
#8
  • Mar 18, 2006
  • #8
mustangn00b said:
with just a pulley???? lol that's insane how much you pay for it?
Click to expand...
The crank only pulley is $124.95 http://www.aspracing.com/

They don't normally sell just the crank but I want to slow everything only 25%. I did get a short belt. If you buy the kit you retain the factory belt.
 
M

mustangn00b

New Member
Feb 16, 2006
17
0
0
Mar 19, 2006
#9
  • Mar 19, 2006
  • #9
^ thanks bro.. i'll add this site to my favorites


come on guys i know there are more of you that have 05 gt runs
 

steedastang06

European Forum Founding Member
Feb 25, 2002
1,844
0
0
Ewa Beach, Hawaii
Mar 20, 2006
#10
  • Mar 20, 2006
  • #10
i went to the strip this past weekend for the first time in my 06 GT with the mods in my sig and the best i could squeek out was the following:



I did get insane wheel hop though... thought i broke something in the rear at first... at the end of the run i couldnt turn my TCS off and the ABS and curved road ahead lights stayed on but after the second run they went away.. did notice i gaine .01-.02 with the TCS on...
 

eric n

Founding Member
Jul 14, 2001
875
2
19
Bakersfield, CA
Mar 20, 2006
#11
  • Mar 20, 2006
  • #11
steedastang, I see no pic could you post your time?
 

steedastang06

European Forum Founding Member
Feb 25, 2002
1,844
0
0
Ewa Beach, Hawaii
Mar 20, 2006
#12
  • Mar 20, 2006
  • #12
hmm thats wierd... here is a pic..
 

Attachments

  • Race1.webp
    53.1 KB · Views: 222

Deths91Gt

Founding Member
Sep 30, 1998
1,394
3
39
KS
Mar 20, 2006
#13
  • Mar 20, 2006
  • #13
My Auto went 13.93 at 99 mph. Dont know how i did it cause it has only gone 14.0's since?? Lots of wheel hop on take off with these cars though.
 
L

LarryS

Mar 21, 2006
#14
  • Mar 21, 2006
  • #14
Deths91Gt said:
My Auto went 13.93 at 99 mph. Dont know how i did it cause it has only gone 14.0's since?? Lots of wheel hop on take off with these cars though.
Click to expand...
Get a set of these. That should eliminate that wheel hop. http://cgi.ebay.com/ebaymotors/PERF...cmdZViewItemQQcategoryZ33583QQitemZ8048050150 I just received mine but haven't installed them yet. They look like quality pieces with good strong welds. Energy Suspension poly bushings.
 
W

warlock1313

New Member
May 21, 2005
5
0
0
Mar 23, 2006
#15
  • Mar 23, 2006
  • #15
I ran 13.8@100mph, last weekend. The temp was 45*and humidity was 45%. I was hoping to get 13.5, as I heard these get stock, but it wasnt in the cards. It was way to cold for O.E. tires.
 

ramjetlx

New Member
Apr 8, 2005
212
0
0
Honolulu, Hawaii
Mar 29, 2006
#16
  • Mar 29, 2006
  • #16
Average time for mine stock was 13.7 at around 101 mph. Could go faster but the track is really bad here. Best on CAI/Tune is 13.4 at almost 103 mph.(93 octane) These cars are amazing!!!
 
F

flaming70vw

New Member
Dec 13, 2004
44
0
0
Apr 20, 2006
#17
  • Apr 20, 2006
  • #17
What now im pissed. My best was a 14.9 @94.6mph. I raced another stock stang that went 14.6. I had him until i shift into third and realized the traction control was on and watched him drive around me. So i was on track for a 14.5, maybe. The track is at 2,710 ft altitude. What the heck is wrong. I am launching at around 3000 rpm or so. any advice.

First time out with roush stage 2, 1,000 miles on odometer.
 

blk05gtstang

New Member
Apr 24, 2005
13
0
0
Illinois
Apr 23, 2006
#18
  • Apr 23, 2006
  • #18
Went to the track yesterday for the first time and got the following with mods in sig (I'm in the left lane). I know it could run faster than this though.

 

Attachments

  • timeslip.webp
    15.5 KB · Views: 146
N

NY05GT4ME

New Member
Apr 2, 2005
38
0
0
Upstate NY
Apr 23, 2006
#19
  • Apr 23, 2006
  • #19
Anybody know where I can get underdrive pulleys for my car? I looked on asp's website but couldnt find anything.....only for the v6 and when you click on that nothing happens.....thanks!
 

ramjetlx

New Member
Apr 8, 2005
212
0
0
Honolulu, Hawaii
Apr 23, 2006
#20
  • Apr 23, 2006
  • #20
Try Steeda or Rousch. They have some for a little over 200.00.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
759
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
S
Engine 2003 Mach 1 Automatic Upgrades assistance
  • SJK1417M1AT
  • Sep 25, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
291
SN95 4.6L Mustang Tech Dec 21, 2025
01SVTvertt
0
Eastern North Carolina Autocross Events!
  • Warhorse Racing
  • Feb 23, 2026
  • Regional Forums and Event Information
Replies
0
Views
332
Regional Forums and Event Information Feb 23, 2026
Warhorse Racing
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
450
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?