Your Engine Compartment!!!

sburkey1967 · Sep 28, 2007

Ok, hoping to see how many different types of engine compartment setup's people have come up with. To keep it stock, clear up space, make it perty!! After your pic's, list a quick description of car and engine setup.

Drop a pic of your engine setup and let's see what's out there.

1967 Mustang Coupe Restomod
351W, 400 HP, Serpentine Setup, Ron Davis Radiator, relocated battery

Decurion · Sep 28, 2007

Im guessing it shouldnt look like this... 65 Comet wagon, 302, world products 185 heads, 278 cam, blah blah blah

classic boost · Sep 28, 2007

iskwezm · Sep 28, 2007

heres mine a few shiny things
View attachment 360109

JC6715 · Sep 28, 2007

Note to self, cleaning the engine bay with fire extinguisher isn't very effective...

jamison42166 · Sep 28, 2007

289 modified with Edelbrock RPM power package including aluminum heads, intake, hydraulic roller cam, new pushrods, new lifters, roller rockers, 750 CFM carburetor with electric choke. March Performance billet pulley under drive system, cool flex radiator hoses upper and lower. Accel coil high performance coil & points eliminator kit. New fuel pump, Russell fuel line, generator replaced with 80 amp alternator.
C4 automatic rebuilt by JPT transmissions 2000 stall converter all thrush washers replaced with needle bearings
8 inch rear end 3.80 limited slip differential
Lokar auto shifter with leather boot
total cotrol products power rack, coil over conversion and SSBC power disc brakes

iapexl8r · Sep 28, 2007

my 65 fastback
View attachment 360075
View attachment 360077
View attachment 360079

*******my 65 vert*********
View attachment 360082

dennis112 · Sep 28, 2007

Just your basic 393 (in Hipo 289 disguise.)

sburkey1967 · Sep 28, 2007

thermostat housing

if you look in the first picture posted, the location of the thermostat housing neck is straight up into my monte carlo bar.....anybody have suggestions, with the serpentine setup and monte carlo bar in mind ( I can always just loose the monte carlo bar but I don't want to! hehe), as to what I can do to clear this? I really want to use the cool flex hose but don't think it will clear with the current setup. Thanks.

iskwezm · Sep 28, 2007

Use a different t-stat housing

68GT500KR_Vert · Sep 28, 2007

Move the bar forward or get a adjustable housing on a 45 degree. The Adjustables rotate and use a O-Ring to seal.

sburkey1967 · Sep 28, 2007

I can't move the bar due to the closeness of the A/C compressor. I would like to get a different housing but don't know of any that would fit. I even think the forty five straight forward T-stat will hit the bar for the alternator on the serpentine setup. I have been looking, not hard, but haven't seen any yet. Know of any multipositional ones?

Rusty67 · Sep 28, 2007

CSR Performance makes one. I think they make a 45* one. I know for a fact they make a 90* one.

JamesW · Sep 28, 2007

As stock a 5.0 as I could put in this 65.....

sixtyfive · Sep 28, 2007

JamesW said:
As stock a 5.0 as I could put in this 65.....

Where did you get the bars that mount from the shock tower to your firewall, and fender well to fender well? Awesome looking engine setup too!

mustbereel · Sep 28, 2007

Mods in sig (fastback)

classic boost · Sep 28, 2007

wow, there is so much room!

enferno · Sep 28, 2007

paul302 said:
wow, there is so much room!

no such thing!

mustbereel · Sep 28, 2007

paul302 said:
wow, there is so much room!

That's one of the nice things about a MII conversion. I also hid the wires in the fenders so that cleans it up some too.

Easy plug access.

xoxbxfx · Sep 28, 2007

iskwezm said:
heres mine a few shiny things
View attachment 359995

I think the supercharger looked better

Your Engine Compartment!!!

New Member

Attachments

Member

Attachments

Member

Attachments

Member

Member

Attachments

Attachments

New Member

New Member

Member

Attachments

Member

Attachments

Member

Attachments

Member

Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency