how do you install fog light bulbs

[abouttobeglue]

bought silverstars for head and fog lights, got the headlights in fine, cant get the fogs in. i took the clips out and the cover off, and the 2 bolts where the front bumper and grill meet, i tried to bend the tabs up on the sides(2 on each side) can get the top but not the bottom, any other way to do this? it doesnt help with tight spaces and hams for hands

 

[Power4]

Are the Silverstars really much better than the standard bulbs? I've got some in my Taurus and they're much better but the 'Stangs lights seem significantly brighter.

 

[APDPerformance]

I pulled the grill assembly out far enough to reach my hand in and it worked no problem.

APDPerformance

 

[Spdfreak]

Yeah, I believe the grille has to be partially removed. BTW, what are the model #s for the heads and fogs for the silverstars?

 

[DAMNitzHENRY]

i have the silverstars in my fog light, it looks alot more whiter with a little shade of baby blue and is brighter also, cant say the same for my headlight cause it looks almost the same.

But i didnt have to take the grill off when i put in the fog lights, but i almost scratched off the paint. Would be alot better to just take the grill off, maybe lay under the car would help you get access to the lower clips better

-Henry

 

[GOLDENPONY]

Fogs

By the way, the instructions to replace the Fog bulbs is in the owners manual.

 

[stanmckinney]

I had a fog light bulb come lose and fall inside the light. Talk about a problem.
These new lights, are they the kind that I see on the road that really bother my eyes?

 

[GOLDENPONY]

I had a fog light bulb come lose and fall inside the light. Talk about a problem.
These new lights, are they the kind that I see on the road that really bother my eyes?

I think you are refering to HID lights. Silverstars are not HID.

 

[NorthwestGT]

Like Goldenpony says, the instructions for fog lamp replacement are in the manual. Unfortunately, they don't provide a picture. I didn't remove the bumper cover bolts as the instructions say. I just removed the radiator cover and then loosened up the grille. The tricky part as I recall was getting the grille clips loose so that you can move the grill and have clearance to work. I think there are at least four plastic triangular clips that snap into retainers to keep the grille in there. You have to push the clips outward so they can clear those retainers. When you see the setup it will make sense. Replacing the grille is really easy since they just snap back into the retainers.