67 Super Snake Project

[67FBack]

Battery Box

I bought the Optima Battery and put it in the brackets.

My dilemma is.. should I mount it with the side mount cables hidden (to the passenger side) or have them visible from the inside?

How about facing rear and closer to the back so they are not that visible?

Here is how I have seen one mounted, but it is not the Mustang Billet box!

 

[67FBack]

Engine Dyno Results

Here is the official dyno results. It is set at 10 lbs boost, and 38 degrees timing. The EFI is pulling out 1 degree of timing for every pound of boost. That will kill some horsepower, but I could add a switch and have a second tuning table for a higher octane gas. That is for when I REALLY need some get up and go!

You guys think I need NOS?

 

[67FBack]

My 427FE

My 427FE

 

[67FBack]

Paint

Paint is going on the car!

Doors & front fenders have been painted

And the stripes have all been laid out. Tungsten Silver (new Ford GT color) stripe on Black, with a gold 1/16" pinstripe.

 

[Edbert]

Dude, that car is....SICK...

Did I mention how much I hate you recently, almost as much as Reen!

 

[68FBJJZ109]

Wow very nice, I would say you fine with the HP levels make sure she can control it... the go for more.

 

[Bosscat]

Car ****! Looks awesome!

 

[67FBack]

Painted .. well partially

View attachment 391303

 

[67FBack]

A Long Time Coming

Dude, that car is....SICK...

Did I mention how much I hate you recently, almost as much as Reen!

hah Thnxs.

I have been working on this thing about every other day, for over a year now. its been at the body shop since Nov 1st.

 

[68FBJJZ109]

Nov thats dishearting on a personal note haha. Happy with black?

 

[67FBack]

Nov thats dishearting on a personal note haha. Happy with black?

Everybody has their favorite color. I have always been partial to red or black. But I have seen so many good looking mustangs here that I had considered changing my decision several times.

 

[Cobra ssc]

Speechless...incredible car...keep updating the progress

 

[67FBack]

Speechless...incredible car...keep updating the progress

You are welcome to come see it if you want. I see you live close.

Edbert, you ever by this way, e-Mail me first and come on by.

 

[67FBack]

Front Fenders, Hood, Doors & Trunk Installed

 

[Sicarius428]

Very nice... By the way I hate you too.
Kevin

 

[67FBack]

Very nice... By the way I hate you too.
Kevin

ha

Its good to be ... hated. ha ha

 

[67 Evil Eleanor]

Love that color combo. Nice of you to post photos. I was looking at the wiring on the row of circut breakers. Looks like 12 or 14 in series to each with the feed being the same. I would recommend maybe a 8 at least to feed these if its only a couple feet from the sorce and a flat copper bus with holes drilled for each stud to connect the breakers. If all circuits load, your feed wire may fail. Not trying to be a "Know it all" but I'd hate to see a beautiful car damaged. Just trying to help.

 

[67 Evil Eleanor]

After looking at some charts, An 8 is too small, a 6 or larger would be better for a feed if its not too long.

 

[67FBack]

Love that color combo. Nice of you to post photos. I was looking at the wiring on the row of circut breakers. Looks like 12 or 14 in series to each with the feed being the same. I would recommend maybe a 8 at least to feed these if its only a couple feet from the sorce and a flat copper bus with holes drilled for each stud to connect the breakers. If all circuits load, your feed wire may fail. Not trying to be a "Know it all" but I'd hate to see a beautiful car damaged. Just trying to help.

I have been thinking about that. I came across a 7 gang box that uses a flat strip. I might change this setup.

 

[Cobra ssc]

You are welcome to come see it if you want. I see you live close.

Edbert, you ever by this way, e-Mail me first and come on by.

I would love to come by and see it when I get a chance...I'm still trying to decide on an engine combo for mine.