Search results

  1. M

    Cobra Heads and TFS cam

    How well does 5.0 Cobra heads with 1.7s go with the trickflow stage 1 cam? How is the clearance from valve to piston? Is it safe? Oh and do you think this setup with cobra intake....and supporting fuel and air parts will do good with a VORTECH SQ trim? Thanks in Advance
  2. M

    Car Wont Start...HELP

    I dont know what is wrong I just did a rebuild on the motor and it is supercharged. After putting everything back together it cranked up fine. I went back and forth to work not getting into it letting the motor break in. Well When I felt comfortable that everything had broken in 500miles later...
  3. M

    Worth IT ?

    Hi everyone after installing a Vortech SQ running at 8 lbs I blew a head gasket. So I decided that while I was at it I my as well rebuild it. Well all that is going to be done is a 306 .030 over with low compression pistons, Set of rebuilt stock E7s with a little port work...Not much though)...
  4. M

    Oops!!

    I have a bit of a problem and was wondering if anyone has an awnser to it? I had recently bought a vortech and while running it pretty hard I managed to blow a head gasket in the process. Well I started tearing my motor down and right as I pulled up the distributor a piece of tape that had...
  5. M

    Car acting Wierd!!!

    Well heres how it went, I have only had my car (95GT) for 6 months. When I first bought the car it ran excellent. It had good power and would climb the rpms fast and could also smoke the tires without trying. But it pinged a little so I had the idea to back the timing off a little. Ever since I...
  6. M

    Vortech installation cost

    I have bought a vortech sq kit from summit racing and due to work I have no time to install it myself and would probably take a long time if I tried. But anyways what is the average cost for a professional to install it for me. Amazon tuning is about 15 minutes from me I dont know if some of you...
  7. M

    Stock ponys white?

    I have a 95 mustang with the pony wheels or waffle wheels as some people call them. Anyway how would these wheels look white on a white car? Any pics would be great...Thanks :)
  8. M

    96 cobra....could it be quick?

    My buddy has a 96 cobra with low miles. He has ordered some parts and should all be here in a week. Parts: Centerforce dual friction, beffed up T45 with longer 1st gear,4:30s, magnaflow X, Bassani catback, JLT cold air, Centerforce aluminum flywheel, underdrives. What might his car run...
  9. M

    Timing Issues

    How do you set the timing on our cars , I noticed its not like the fox bodied cars with the spout connector beside the distributor. Is there a spout connector somewhere else on our cars that you half to unplug before setting timing? I will greatly appreciate your help.
  10. M

    What to do with $500

    I have a 95 GT Bone Stock/except for Magnaflow X and magnaflow mufflers, CAI. What can I do to really pep up my car with $500.
  11. M

    GT vs 96 cobra

    What does it take for our cars to keep up with the modular 4.6 cobra? My buddy just bought a 96 cobra so I had to see what it had in it, so coming back from town today we decided to test the two cars, mine and his cobra. My car is a 95 gt stock except for exhaust,cai. His is bonestock. From a...
  12. M

    x-pipe

    Does anyone have a sound clip of an x-pipe with stock mufflers? I am heading to the local muffler shop pretty soon and he is installing me a magnaflow X to get rid of the stock h pipe and cats. I figured I would be different and money is hard to come by at this point in time, so that leaves me...
  13. M

    Photochop anyone? Asking nicely

    I need a chop on the taillights on this page http://forums.stangnet.com/showthread.php?t=631009 I am wanting to know what his taillights with the black covers look like on a White 95GT, so basically take the taillights off his car and put them on a 95 white GT. I would offer a pic but I...
  14. M

    Taillight covers

    I am new to the SN 94-95 cars and just recently purchased a 95Gt. Anyways I am wondering how the plastic bars that loop around the taillight come off because I want to paint them. Does the hole taillight have to come out...
  15. M

    Problem, but cant fiqure it out

    I just got my car fixed and bought the street avenger 670 carb well I put it on adjusted the floats etc.... and took it up the road and it seems to start surging below 2200 rpm or when i steadly keep it at like 3000 in any gear and when I cruise around for along period of time and I nail it,it...
  16. M

    PLEASE NEED HELP

    I have a problem, I just recently put all new gaskets,seals,and bearings in my 302ci The only thing i left in there were the rings because they only had 5000 miles on them and car didnt smoke. So i put my motor back together and take it for a test drive and my rear intake gasket starts leaking...
  17. M

    Carb/Intake suggestions

    I am very disgusted with how slow my car is even with the big upgrade with the whole Trickflow Setup and I know what it is,Its the fuel and air situation. I have no injectors,mass-air,throttlebody and since thats too much money and I am short of money, I want a carb and intake, I will only be...
  18. M

    I need fuel and air....help me

    I just recently got through with an engine build up that consists of Minor machine work Trickflow Street heat kit: TW aluminum heads TF stage 1 cam w/1.7 rockers TF upper and Lower Headers Now I am needing the following: Injectors,MAF,Throttle-body The problem is that I have no...
  19. M

    What intake and carb is best for this setup?

    I have recently built a motor that consists of: 306 ci Trickflow Twisted Wedge heads Trickflow stage 1 cam Trickflow 1.7 rockers Trickflow Upper and Lower intake Cold air BBK headers 3500 stall 3:55 gears What the problem is, is that the motor has no throttle responce and well I...
  20. M

    Need Help with Fuel Problem

    Well yesterday I was outside letting my car warm up and all of the sudden the car cut off well I cranked it back up and after that it idled for about 10 seconds then cut off, So I cranked it again and gave it some gas and then it only stayed running for about 5 seconds,the next time I went to...
Top Bottom
Back
Forums
Menu