Search results

  1. Venom351R

    Expired Mac 3"prochamber (long Tubes) For 2.5" Exhaust 94-98

    I had the very end of the prochamber ( the end that flares out ) cut off so that it can band clamp directly to the collectors. Also had the section of the other end cut off and an adapter welded on that will accept a 2.5 Catback system. The over all length of the system is the same as it was...
  2. Venom351R

    Expired Modified Mac 3" Prochamber For Long Tubes.

    I had the very end of the prochamber ( the end that flares out ) cut off so that it can band clamp directly to the collectors. Also had the section of the other end cut off and an adapter welded on that will accept a 2.5 Catback system. The over all length of the system is the same as it was...
  3. Venom351R

    Finally Time To Dyno Tune The New Engine Combo!!!!

    This friday at Protree Performance in Hudson NH. Time.... TBA Old combo AFR 185's ( 72cc Combustion chambers) TFSR Intake FTI Camshaft Shorty headers Bassani X pipe/magnapacks Approx Compression Ratio : 8:4 Power: 344/347 at the feet Approx Compression Ratio : 8:4 New Combo Custom CNC...
  4. Venom351R

    Ive Done Everything I Can Do, Its All Up To The Dyno Shop Now.

    Took the Mustang down to Protree Performance in N.H today for them to weld in the cats and fit the catback system and do the tune. The lower intake needs to be redone again it was blowing oil out the back the whole way down. I dont think I have a good enough bead of RVT on the back. Other then...
  5. Venom351R

    How Wide Of A Tire On A 18x9 Wheel?

    How wide can you go before it will bulge or not properly fit?
  6. Venom351R

    Brakes First Test Drive Did Not Go So Well, Having Some Issues.

    Got the rear caliper on, bled the system and did all the other last min things that needed to be done. Took it out for a drive but the brakes are still messed up. The pedal is very stiff and when I press down on it it barley wants to stop. Also the temp went up to about 230. It never usually...
  7. Venom351R

    Brakes Went To Bleed The Brakes Now I Have Leaking Fluid

    Started to bleed the brakes and it is dripping fluid off a bolt from behind the caliper. No fluid came through the hose when the pedal was depressed. When the valve was closed and the brake released the fluid started to drip from this spot. Its coming right out from where this bolt goes in but I...
  8. Venom351R

    Finally After 1 Year And 105 Days The Start Up Day Has Arrived.

    Tomrrow I will go to start up the Cobra after this long project has started. What started out as a simple head swap turned into a lot more and encounterd some delays, hang ups and problems along the way. But hopefully all of that is behind me and as for tomorrow it will be running. I'm picking...
  9. Venom351R

    Where Is This Power Steering Fluild Leaking From And Why??

    Put all the fluids back in the car today, only thing that has become an issue is the power steering pump. Its leaking the fluid and dripping off from the back of the bracket but I cant figure out exactly where it is coming out from? The line that screws into the side of the pump is tight unless...
  10. Venom351R

    What Size Is A Mini Starter Compared To The Standard Length Starter?

    Debating if I need to get a mini starter or not. I read an add for one that said it was around 6" (it was 6. something I'm going off from memory) But I mesaured my starter that I have on there now and it is 6" exactly from the point where it mounts to the trans to the amount that sticks off from...
  11. Venom351R

    Exhaust Last Exhaust Related Question Before The Install

    Ive posted a lot of exhaust questions this year but only b/c I want to do this once and get it right so here is my last concern. I want to make sure everything lines up with the hangers correctly so of course the over all length of the exhaust system comes into play. For a quick rundown I'm...
  12. Venom351R

    Happy 10th Year.

    Just noticed that as of a few days ago Ive been on here 10 years. The majority of my time has been spent here in the 94/95 section . Its nice to see that this section has had more life in it then it has in past years. A lot of you guys have been a great source of knowledge and info over the...
  13. Venom351R

    Exhaust Whats The Best Way To Neck My 3" Prochamber Down Into A 2.5" Catback?

    ever since I got the Mac 3" prochamber Ive been racking my brain on how to get it to properly fit up to a 2.5" catback system. So with that said what is the best way of getting my prochamber to match up to my soon to be bought Borla system? I see it done all the time but I'm just not sure on the...
  14. Venom351R

    How can you keep rubber from the track off the exhaust tips?

    I'm going to be getting a borla catback system in a few weeks and I do not want the tips getting trashed like my old mangpack exhaust system did. Is there anyway to keep the rubber from getting caked and burnt onto the the exhaust tips to the point where it will not come off anymore? My...
  15. Venom351R

    Need some feed back from residents of Arizona

    Been considering of making a big change in a few years and moving out west. I would like to move to Chandler AZ or somewhere close to there. For any of you guys out there or who have lived there can you give me some good/bad or any info regarding living in AZ. I did notice the housing market...
  16. Venom351R

    For $100 Spark Plug Wires You Would Expect Them To Fit Better Then This

    Broke down and bought some Livewires which I have wanted for awhile. Have had them since Feb but just got to the point of being able to install them on the car.....or so I thought... Not sure WTF is wrong w/ these things but they are getting sent back for another set.
  17. Venom351R

    Why am I having so many fitment issues? Power Steering pump now...

    Went to replace my crappy looking PS pump through this whole upgrade project I bought this one http://www.summitracing.com/parts/AGR-809102/ Put the pulley on today and mounted the bracket to the head. But the line that screws into the side of the pump (the fitting with the red cap) is to...
  18. Venom351R

    Drivetrain Should I Have This Space Between My Trans And Driveshaft?

    Got done working on the rear end last weekend and bolted the drive shaft back on but once it was back on I noticed this space between the trans and drive shaft yoke. Should this be all the way up into the tranny or is it b/c out slightly b/c the car is on jack stands and higher up in the front...
  19. Venom351R

    Belt Tensioner questions

    Been awhile since I took it all apart but when I put it all back together I was unsure if I put the spacer on the tensioner on the right side or not, does it go on the back side or front side of the pulley? I had it on the front side originally but now I'm second guessing if I put it on the...
  20. Venom351R

    Exhaust Will Piecing Together This Exhaust System Work?

    I really want to run a borla cat back system. It sounds awesome and I have never run borla before. Problem being the cheapest kit I can find is $640....ouch. But I remembered something that does help me out. I still have the flowtubes from my Dynomax superturbo's that I can take off and I...
Top Bottom
Back
Forums
Menu