I am having an issue installing my clutch cable in my engine bay. After taking the picture, it appears that the front clip has either been welded back on or had a new front section welded on (more likely, because the underside of the front clip is red versus the green my car’s factory color is...
I have looked here on the forums and didn’t see anyone talking about a similar issue so if I missed it sorry but I am working on my dads ‘93 fox and I replaced the top cylinders and lines well I believe I have bleed it right I ran it up and down a few times 3-5 with the plug out and filled it up...
I’ve got a t-5 attached to a well built 393w. I’ve never gotten on it. Drove it 3times since finishing the engine. I rolled it into my basement put it in gear, jacked it up with 4 stands, took it out of gear. upgraded the entire rear suspension and then found tdc with a piston stop . Installed...
So in the beginning i was having a fuel pump issue so while trying to fix it i replaced capacitors on ecu and now the cars runs fine but with a cel but the problem is my car wont read codes now, i have a hand held code reader that i use but ive also tried jumping the self test to read by...
Hello guys!
I have a 1993 fox and the lights of the cluster I thinks is called warning lights don’t come out. Only check engine,low coolant and battery light come out
In one of the photos is a connector that I don’t know what it do
Sorry for my bad English
i have a 1992 mustang that was a 4cyl/auto, i swapped to a 5.0/t5 from an 86, trying to get it running currently. i got no spark, i have a new coil, distributor, wires and plugs but nothing. i checked wiring too. heres the deal, the 4cyl either didn't have the same coil plug or i cut it and dont...
Hey all, I’m shopping for an 8.8 for my fox and I found this on Facebook market place. The guy doesn’t know if it’s an 8.8 or what year it comes from. He says 94-04. Can anyone tell me how to identify? Or just identify for me with this pic?
Also, will 94-98 mustang rear ends all bolt up to my fox?
Hey all. I am in the middle of a suspension refresh and I feel like now would be a good time to put discs on the rear as well. There is a guy near me selling a 5 lug disc 4.10 rear end. Besides that, what kind of parts do I need? Also I have read that you need a new master cylinder, why is that?
Hey guys so about a year ago i picked up a 1989 lx hatch and recently my torque box has torn
the car sat somewhere for a while so it’s a bit rusty underneath but it’s cracked in half and it’s cracked the floor, how should i go about fixing this? a friend of mine said he could make me a brace...
I have a 87 foxbody mustang gt 5.0 and recently I have lost power to my fuel pump I have replaced the fuel pump relay and the ecc relay I am out of ideas can somebody help
Howdy, I still have the stock rear end in my ‘91 5.0 and I’m looking to 5 lug swap it. I have seen other threads touch on the topic but I want to ask the detailed questions about swapping the Gt Sn95 rear end to the fox body.
Will everything screw into the frame when doing the swap?
What...
Hey guys,
I recently purchased a SN95 5 lug conversion kit with 94-95 spindles, Cobra front and rear brakes, and fox length axels.
I plan on lowering the car around 1 inch, and wanted to ask some questions regarding ride height and suspension setups,
I am thinking of buying adjustable...
So, I took the car to a welder for floor pans, got the car back and I had to get a new battery…
Got the new battery, fixed the terminal connections.
I’m running into an issue now where the car won’t start. I am able to start the car by creating a connection with a screwdriver to the solenoid.
Ford lock set with
Ignition key and lock
Doors and trunk locks only - DOOR KEY IS MISSING
E7ZZ-6121984-B
This was a spare lock set that came with a project car I bought in 2003 that never materialized.
https://photos.app.goo.gl/s2KKM5AcNwKcdAwE8
$20
Georgetown, TX
Please see my other...
PA Performance tubular K-member for Ford Mustang 79-93
https://photos.app.goo.gl/KSh8oLXnoKWoSmbs9
https://photos.app.goo.gl/zsaYcPP2Bd2DtVhe6
https://photos.app.goo.gl/n9hUQMA2T6GHMcVVA
https://photos.app.goo.gl/dRSZbiXCRQVPDWEt7
This is a brand new, never-used part. I bought it new in early...
I'm selling a set of Energy Suspension rear spring isolators, part number 4.6101G, which says they fit 79-95 Mustangs.
I bought this new in 2003 for an 88 couple build but that project never materialized. The parts have been stored in my dad's garage in Midland, TX (dry climate) until now...
I'm selling a set of Energy Suspension front upper and lower spring isolators, part number 4.6102G, which says they fit 86-96 Mustangs.
I bought this new in 2003 for an 88 couple build but that project never materialized. The parts have been stored in my dad's garage in Midland, TX (dry climate)...