foxbody 5.0

Want to slap a supercharger on my 1988 foxbody but I have some questions. i have a Crower stage 3 camshaft. Specs Lobe Separation of112 Intake lift .112 Exhaust lift .131 I got it from a buddy, and I was doing some research on it and I noticed it said not compatible with computer controller...

Okay, been chasing this issue for awhile, previous owner says its a rebuilt t5 with 5k miles on it. After driving it for a few months i was going about 50 dropped it to third and gave it hell. after that i had blown my coolant hose off and over heated. pulled over put it back on, took off and...

Couple of quick pics of my birthday present. I wanted this car so badly in high school. 30 years finally in one. Now to make look like new and run even better. Hoping to lean on some of y’all for advice in the coming months. Wish me luck!

I have a 1989 mustang GT 5.0 manual trans I believe the car is bone stock besides a cold air intake. I have never attempted an engine rebuild but. I have always wanted to my goal for the motor is to make around 400rwhp I don’t want it to be a daily driver but I am seeking reliability I wanna be...

hi everybody so recently i got gifted a ton of 351 and 302 parts and i have a question because while i have changed whole motors and and intakes i still have yet to do a head install. I was given a pair pf x302 ford raving heads for 302/351 and i was wondering could i reuse the springs, roller...

A little about myself-- I'm a high school student who has recently started working on cars on my own. I've been learning a lot through repair books and online references and have been very enthusiastic towards anything that has to do with cars. I have a '93 gt 'stang that i've inherited from my...

i daily drive my 1989 gt i love it to death its gotta be the most fun ive ever had driving and working on it! ive swapped the motor n tranny some mounts and bushings, rear end, rear upper amd lower control arms, complete 5 lug 4 wheel disk upgrade. The only thing i haven't touched is the...

Hi guys, so I’m relatively new to this forum and I would like to hear from some people who can tell me a little more about what would make my car reach 300rwhp. I would like to start of by saying I don’t want nitrous oxide or any boost. I just want naturally aspirated. I don’t plan on any...

Hey everybody, Been searching through the threads but having trouble finding something more recent. I want to do a tune up on my 88 GT running what looks like pretty much original ignition parts. I replaced the spark plugs with standard autolites based on comments i could find in searches...

im having some issues my old 5.0 in my 1989 gt wasnt running good and my dad had a complete with accessories 1994 5.0 that i could have so i swaped and put my 1989 upper and lower intake on the 94 block and kept the 94 accessory set up and put it in the car. i started it up started first try...

Hi Everyone, Just recently purchased a 89 LX from a guy who did not know much about it and has sat for ~5 years. My Father and I drained old gas (orange color) and changed the fuel pump. It now has 35-40psi fuel pressure, will turn over, start but run poorly. We are having two main problems...

When I first bought this car back in May 2015 it died on the freeway and had a similar situation. Put a new fuel pump, pressure regulator, filter in and it fixed the problem. Ever since it's had a weird hesitation under throttle and has bucked and hesitated especially on hills in a higher gear...

Back into a weird situation with my 1987 5.0 LX. I was driving to fill up on gas (I specifically have my vehicle on E85). I filled up and she started right up and nothing was out of the ordinary. The tuner was reading fine also. As I was driving home I hit a red light. Once green I started to...

Im looking at modding my bone stock 1992 mustang GT this winter which also happens to be my first car. Ive done my research and have a solid list of parts that should work together but one thing i havent looked into is the tuning portion. Will i need a tune to run a mild build (intake, cam...

So I got a 91 foxbody 5.0 and it came with the silonoid disconnected and the NNS all 3 wires twisted together. So I hook the silonoid up get a battery and when I would touch the last battery terminal on it even without the key in I would here a loud starter click and when I would go to crank it...