transmission

Hi, I have a 2003 Mustang GT Automatic Transmission with 80k miles. When driving, if I punch the throttle, the car will downshift after a second or so, and it slams when doing so. The slam feels to be in the rear end. It doesnt have any problems downshifting regularly, and upshifting is ok...

Good Morning Everyone, I figured I would make a post about this and see if anyone else has had this happen. I have a Late 2001 Mustang GT and I believe my car has the T45 transmission. The issue is my car is the late 2001 and the vin even says it should have the T3650. I have had the car the...

Alright, this is my first post here so if I'm doing anything wrong, let me know. 2000 Mustang V6 with stock 4-speed automatic transmission. The short version of the issue is that I'm hearing a metallic knocking sound coming from the front half of my car, there is no check engine light, and...

Hi guys, I have a 1970 mustang with a 302 and a c4 select shift transmission. Recently the transmission has been delaying its shifts more frequently as time passes. I adjusted the vacuum modulator screw to reduce the delay and it has not worked (3 full turns counterclockwise). As of right now...

Fun T5 question for a 98 3.8L: Leaking out rear of transmission where yoke enters. I can find an output seal easy enough, but I believe there is going to be "bushing" or "bearing" around the splines that I'll need to replace. Wondering if it's something I can do without dropping transmission. I...

Been rebuilding the T-5 (WC) in my 2000 V6 mustang. Having issues with the 3/4 slider on the rebuild. Slider works fine for 3rd gear but when I attempt to act like I'm shifting to 4th gear, the slider goes too far, which causes the keys in the slider to 'stand up', stopping the slider from...

Hi, I’m doing a transmission swap on a 1971 Torino. I bought a T5 transmission that was in a 1983 4 cylinder mustang. My question is what all do I have to swap out so I can bolt it to a 302 and can I use WC parts

Hey guys this is my first post figured I’d reach out to some forums with some people with more experience than me I have a 1996 mustang gt 5 speed I’ve been fighting this issue for a couple months. I’ve got this knocking noise coming from my transmission. It does it at idle. When I rev and...

Does the 1998 3.8L V6 engine have a rev limiter? I know that the auto transmission shifts at 4500, and that the red starts at 5000, but the tachometer goes to 7000. I was wondering how high can you rev it to in first and second gear before it damages the engine? Thanks

My friend has a 1996 Mustang GT that he wants to LS swap (he's a sinner) later this summer, and I want to do a V8 swap in my car which is a 1998 Mustang V6. He said he'd sell it to me for $850, but I was wondering if I also needed to buy his transmission from him or if the two cars use the same...

Hey guys, I pulled my stock motor and transmission last weekend and have a friend of a friend interested in buying everything. I told him I'd get back to him with pictures and a price but have no real idea what a fair price would be to give him. It's a 1991 5.0 with intake, fuel rails...

World Class T5 for sale. Currently has a pro 5.0 shifter in it and an upgraded clutch however I cannot find any markings on the clutch. Transmission has about 10,000 miles on the rebuild. Located in Nolanville, TX. Asking $700.

I recently got a 2016 EB Mustang Premium and love it, except for one thing - the paddle shifters. I have always preferred the manual mode in the automatic, but the paddleshifts are very awkward while making turns and in some other situations. Is it possible to install a stick shift with the...

Hey guys, I recently had 2nd gear go out in my 91 LX and have been doing research on replacing the factory T-5. Since I'm swapping the stock engine out in the future, I am planning on getting an Astro A-5 but they won't be able to have any built until Jan/Feb. I really want to drive the car...

Okay everyone I have a 1994 GT 5 speed. About a month after I got it a noise formed that I could manipulate if I actuated my clutch. With my clutch Pedal at the floor no noise but when the pedal was up and my clitch was engaged there was a squeak. It got worse, people told me different things...

I need some help figuring out what's wrong with my mustang. I just got it about 2 months ago and it drove fine when I got it. Recently though almost every time I start in first or reverse (no other gears), regardless of the amount of gas I give it, it still shakes. It feels like it isn't getting...

Hiya folks and thank you for letting me join all of you. I am the 2nd owner of a 65 mustang 6cylinder 4speed Mustand classic red, Here are a few things I would like some help on, I have a Dagenheim I believe the spelling transmission 4 speed with the 2nd gear slipping when I slow down. I would...

Hey guys, im a bit new to cars and modding in general but i was wondering if anyone has heard of replacing the stock 5 speed manual trans for a 7 speed manual transmission? Obviously its a hypothetical and im sure would be a completely custom job, but i was wondering if it was at all possible...

I originally bought this to put into my fox but my plans have changed. T56 with upgraded with a 26spline input shaft and a B&M shifter. Centerforce 26spline clutch included, looks to be in excellent shape, also come with a steel 8 bolt flywheel that may need resurfaced. Original aluminum 03...

Hello everyone! Just joined and I have a crazy question! I have a 95 GT. I recently had a new clutch plate, pressure plate, fly wheel, and clutch cable installed. When the car is cold and I press in the clutch and then release everything is fine. However as soon as the car gets hot and I...