00 Vert, windows not working

W

Wotsamattu

New Member

Jul 12, 2007

5

0

0

Jul 12, 2007

#1

• Jul 12, 2007

• #1

I got in my 2000 Vert and the passenger side electric windows work, but the driver's side ones don't. I searched this forum and found a post with the fuse box diagrams. It looks like there is only 1 master fuse (#43) for the windows, so I would assume that if the fuse was blown, none of the windows would work. The door locks still work.

Is there a relay somewhere that I might need to check?

Thanks

 

J

JulieQ18_2003

New Member

Jul 12, 2007

4

0

0

Jul 12, 2007

#2

• Jul 12, 2007

• #2

I've had the same problem with my '00 V6 Coupe for a couple of years or so. My driver's side window seems to short out or something and does work or works poorly (pressing extremely hard or continuously to get it to work and it some times it doesn't). This is very sporadic and I cannot figure it out. It'll usually act up for a few days, then it's fine. Like you, I've never had a problem with the passenger side window.

 

W

Wotsamattu

New Member

Jul 12, 2007

5

0

0

Jul 12, 2007

#3

• Jul 12, 2007

• #3

Did that happen on BOTH the windows, or just one of them?

 

J

JulieQ18_2003

New Member

Jul 12, 2007

4

0

0

Jul 12, 2007

#4

• Jul 12, 2007

• #4

No, just the driver's side window. Like you, I've never had a problem with my passenger window. Think it is a defect with the '00's, possibly?

 

W

Wotsamattu

New Member

Jul 12, 2007

5

0

0

Jul 12, 2007

#5

• Jul 12, 2007

• #5

Well, I just walked out to the car, started the engine, pressed the window buttons and they both worked. Another one of life's little mysteries.

So, never mind.

 

'66 coupe

Founding Member

Aug 7, 2000

1,202

9

59

Lakeland, Fl.

Jul 12, 2007

#6

• Jul 12, 2007

• #6

My '01 coupe had the same problem. Sometimes a good jolt, like slamming the door, would make it work.

No problems with my '95, but my friends '94 V6 had the same problem. His window got stuck in the down position, and I was able to get the motor to work by simply loosening the bolts that hold the motor to the door.

 

W

Wotsamattu

New Member

Jul 12, 2007

5

0

0

Jul 12, 2007

#7

• Jul 12, 2007

• #7

Well, maybe getting out of the car and closing the door did the trick. I dunno...thanks for the reply. Lakeland, eh? I am in Sanford.

 

'66 coupe

Founding Member

Aug 7, 2000

1,202

9

59

Lakeland, Fl.

Jul 12, 2007

#8

• Jul 12, 2007

• #8

Wotsamattu said:

Lakeland, eh? I am in Sanford.

Click to expand...

Back in Lakeland now. I just finished 5 years up at UCF. I may be going up to the dragstrip on Colonial tom. night.

 

B

BlackStallion00

New Member

Nov 11, 2006

22

0

0

Jul 21, 2007

#9

• Jul 21, 2007

• #9

While your on the subject of Not working window

Please do respond to this if you know the answer. LOL both my drivers side windows did not work. My drivers side 1 works now thanx to ford dealership and the tune of $335 but my rear passanger 1 does not. It used to do what yours both did. On and off working but now it comepltly does not work. If you know what to possibly check besides the motor its defintly good because harr ford jumped it to get it up for me. Plus every rare occasion if i pressed it the window will work and i have to press it 1,000 times to get it back up but now it hasn't worked in 6months+. So if anyone knows what to check or how to fix this please share with me your knowledge. thank you.

 

cjones

Founding Member

Jul 20, 2002

1,561

0

37

Avondale, AZ

Jul 22, 2007

#10

• Jul 22, 2007

• #10

BlackStallion00 said:

Please do respond to this if you know the answer. LOL both my drivers side windows did not work. My drivers side 1 works now thanx to ford dealership and the tune of $335 but my rear passanger 1 does not. It used to do what yours both did. On and off working but now it comepltly does not work. If you know what to possibly check besides the motor its defintly good because harr ford jumped it to get it up for me. Plus every rare occasion if i pressed it the window will work and i have to press it 1,000 times to get it back up but now it hasn't worked in 6months+. So if anyone knows what to check or how to fix this please share with me your knowledge. thank you.

Click to expand...

sounds like the switch finally died. put your meter on Pin#11 RD/BK and Pin#13 YE/BK of the master switch and see if you have +12v and -12v when you rock the switch back and forth.

 

W

Wotsamattu

New Member

Jul 12, 2007

5

0

0

Jul 23, 2007

#11

• Jul 23, 2007

• #11

And BTW, my windows began working again on their own, and have worked fine ever since...It must be possessed.