1 inch apacers in rear

[rudy herrera]

does any one have a picture with 1 inch spacers in the rear with the stock ponys i have a 265/55/16 tire on them i want a wider stance without getting other rims trying to keep the exterior close too stock
and another thing could spacer the stress from the launches

 

[MahFiVeOh]

I wouldnt trust a 1 inch spacer. Plus that 265 tire seems a bit wide for a pony wheel....sidewall bulge anyone?

 

[90lxcoupe]

no pics but unless your gonna run the bolt on spacers you will need longer studs

 

[rudy herrera]

i am going to run the bolt on spacers and the bolds is not that bad
but wats wrong with it i think it looks good

 

[Mustang5L5]

but wats wrong with it i think it looks good

Safety.....



but your car/life

 

[90lxcoupe]

theres nothing that isnt safe about it, the spacer will bolt to the studs, and the wheel will bolt to the spacer

 

[Cobra912]

that is a wide tire, I had a 255 on my old wheels and boy did it have sidewall bulge.

 

[Beasty306GT]

i would not do it..thats to big of a spacer..safety first...not worth having the wheels fall off

 

[njoliver]

do it if you want to replace wheel bearings every couple thousand miles...it puts a lot of stress on the bearing, I guess you can see why

 

[old_blue]

I would do a search and you will see why peeps on here stay away from a spacer that big. too many wheels flying past people on the freeway. Your car though. Sorry I can't help with pics.