Seatbelts are a real problem . Does anybody know how to make them not grab all the time . Im going thru this also . They sell universals on one website. You would think you could get them as easy as all other parts
Seatbelts are a real problem . Does anybody know how to make them not grab all the time . Im going thru this also . They sell universals on one website. You would think you could get them as easy as all other partsI've started to research my interior reinstall and have run into a common problem of sourcing new or reconditioned seatbelts. I contacted Prestige Mustangs and apparently '93 notch rear seatbelts are as hard to locate as interior trunk lining. Prestige Mustangs suggested I try "seatbelt (re)webbing" which is the replacement of your old seat belt webbing with new webbing. LMR has new front seatbelts, but no '93 rear seatbelts. So, long story short...in all new seatbelt webbing in black ($74.99 each) and Seat Belt Restore out of Westfield, MA will repair one of the seatbelts which has locked up for a total of $365.
There is a guy on one of the Facebook groups that makes the trunk carpet stuff . It isn’t the exact shape of oem but it’s very nice . He also makes the carpet for the trunk lid itself .I've started to research my interior reinstall and have run into a common problem of sourcing new or reconditioned seatbelts. I contacted Prestige Mustangs and apparently '93 notch rear seatbelts are as hard to locate as interior trunk lining. Prestige Mustangs suggested I try "seatbelt (re)webbing" which is the replacement of your old seat belt webbing with new webbing. LMR has new front seatbelts, but no '93 rear seatbelts. So, long story short...in all new seatbelt webbing in black ($74.99 each) and Seat Belt Restore out of Westfield, MA will repair one of the seatbelts which has locked up for a total of $365.
Cool. Thanks. I remember you mentioning the undertrunk liner. I've heard of the coupe trunk liner going for $350 and up. I was able to locate some convertible lining and will see how that looks once it is reinstalled.There is a guy on one of the Facebook groups that makes the trunk carpet stuff . It isn’t the exact shape of oem but it’s very nice . He also makes the carpet for the trunk lid itself .
Auto-munchausen syndromeWhat does it mean when you enjoy wrenching on your car more than driving it?
Herr Dr. karthief diagnosis.Auto-munchausen syndrome
Thanks. And you spelled California correctly. Well done. The politics in this state drive me crazy.Too bad you are in kalifornia, I have one.
I'm sure that should be easy to find on Criags list (I've seen them on there for my area) or salvage yard...I don't have a stock k member lying around.
I don't know that I would trust an almost 30 year old used k member. Unless its visably bent, you wont know if it is until you have the car aligned and after you installed that pain in the ass. I guess its worth a shot though, and maybe your only option if you don't want to spring for a new aftermarket replacement.You cant find a used stock k member? It is a pain to swap, but not to bad considering everything else you've done. I had mine off last winter. Used one of those cheap across the inner finder engine supports from Harbor Freight to hold the engine up.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?