Yes these look like the ones that are on there nowThis wheel
Pretty confident there are center cap issues when using the Mark 7 style 5-lug rotors. Lemme see if I can find the pic I was citing.
looks like it maybe???The center caps on that style wheel will fit fine no matter how the 5 lug conversion was done, if you were wanting different style wheels you could end up with a center cap issue. You can pop the center cap off one of the front wheels and look for a bearing cap snout sticking out, if you have that then you will be limited on wheel choices.
Yes tires and wheels he said hes not a fan of stock wheels or cobra wheels because it is to common and he likes a little different and he likes maybe 17x7 in front with skinny tires and a 17x9 in back big wide thick tires.Are you looking to replace the wheels as well?
100% wrong. Had a buddy put these exact wheels on his GT a decade or so ago with a the Lincoln rotors up front (the same way I'll assume this car was done) and they made contact with the dust caps. Even without the caps on, they made contact. His options were to not run centre caps at all, cut out the middle of them, or (what he did) heat the cap with a heat gun and press it into the dust cap until it deformed enough to go on.The center caps on that style wheel will fit fine no matter how the 5 lug conversion was done,
So basically what does that mean for me a whole lot of work and not knowing what I'm doing100% wrong. Had a buddy put these exact wheels on his GT a decade or so ago with a the Lincoln rotors up front (the same way I'll assume this car was done) and they made contact with the dust caps. Even without the caps on, they made contact. His options were to not run centre caps at all, cut out the middle of them, or (what he did) heat the cap with a heat gun and press it into the dust cap until it deformed enough to go on.
...all three options looked like ass.
So basically what does that mean for me a whole lot of work and not knowing what I'm doing
No ignore this. Your front brakes are 94-98 Mustang GT/V6 brakes. You can run wheels without worrying about the center caps.
Any 1994-2004 Mustang 17x8 will fit...or aftermarket is the specs are right.
2003-2004 Cobra wheels are 17x9. They will fit, but a little bit tighter as tire size is bigger.
Lug patter is 5 x 4.5" or 5"x114.3mm Same thing
So basically what does that mean for me a whole lot of work and not knowing what I'm doing
No ignore this. Your front brakes are 94-98 Mustang GT/V6 brakes. You can run wheels without worrying about the center caps.
Their site is acting up, but this is a good source for aftermarket 'clones'
Wheel Replicas - Wheels for Your Mustang, Corvette, Camaro - Free Shipping
Also Welds are really nice
Weld - Leader in Racing and Maximum Performance Wheels
http://weldwheels.com/shop/street-strip/rt-s-2014/rts-17-inch/
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?