• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

2002 V6 mustang wont start, changed so many parts, at a loss

  • Thread starter Thread starter 02stangbase
  • Start date Start date Oct 4, 2021
  • Tags Tags
    mustang mustang 02 now wont start at all v6 3.8l wont start
0

02stangbase

Member
Oct 4, 2021
3
1
13
Mason, Ohio
Oct 4, 2021
#1
  • Oct 4, 2021
  • #1
My 2002 V6 mustang won't start. It began right after I got home and now it just clicks a single time (starter).

I started troubleshooting by checking the starter relay & fuse, replacing them with no luck. Then I tested the battery myself and it read 12.4V with the car off, not bad but this could be due to my failed attempts to start the car. I brung the old battery to get tested at an autozone and they just told me there COULD be a bad cell, so I bought a new battery anyway, the old one was at least 4 years old.

New battery, car still wont start. The alternator is also less than 6 months old and the brake lamp switch was replaced about 4 months ago. New battery reads 12.6V when off.

Finally, we replaced the starter with a new one. Both autozones in my area said their starter testers didn't work. Car still did not start

Used a continuity tester on the fuses, all checked out and the starter was put in properly.

Motor ran like a dream and is in pristine condition for its age as stated by blackstone labs.

What in god's name is going on?

Battery terminals are clean, grounds look fine, and me and my friends are dumbfounded.
 
0

02stangbase

Member
Oct 4, 2021
3
1
13
Mason, Ohio
Oct 4, 2021
#2
  • Oct 4, 2021
  • #2
I removed the new relay and used a wire to bypass the relay and the starter still just clicked once and did not crank.
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,740
3,189
203
Taylorsville ky
Oct 4, 2021
#3
  • Oct 4, 2021
  • #3
Try turning the engine over by hand (breaker bar/ratchet on the crank.)
 
0

02stangbase

Member
Oct 4, 2021
3
1
13
Mason, Ohio
Oct 5, 2021
#4
  • Oct 5, 2021
  • #4
RaggedGT said:
Try turning the engine over by hand (breaker bar/ratchet on the crank.)
Click to expand...
Ill be trying this later today!
 
Reactions: RaggedGT
You must log in or register to reply here.

Similar threads

T
2002 V6 3.8L Help Me
  • TheIncompetentMechanic
  • Apr 4, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
50
Views
894
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
TheIncompetentMechanic
T
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
182
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
S
Crank no start, I’m stumped!
  • Seth Brogan
  • May 18, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
987
1996 - 2004 SN95 Mustang -General/Talk- May 14, 2026
BossHorseGirl
B
M
Resolved PATS problem with a Mustang 2010 V6 - SOLVED-
  • MRMRacing
  • Feb 22, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
7
Views
5K
2005 - 2014 S-197 Mustang -General/Talk- Mar 1, 2025
MRMRacing
M
D
Electrical Grinding when starting car, now car won't start at all
  • dqureshi06
  • Apr 22, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
1K
Fox 5.0 Mustang Tech Jun 30, 2024
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?