• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

24 lb injectors

  • Thread starter Thread starter bigyet12
  • Start date Start date Sep 20, 2005
B

bigyet12

New Member
Sep 19, 2005
23
0
0
Sep 20, 2005
#1
  • Sep 20, 2005
  • #1
I am rebuilding my 88 5.0 lx 5 speed. It now has a ford e-303 cam, 65mm tb, bbk 1 5/8 headers. BTW I am converting it to mass air also. From what I have read so far it seems like people only recommend 24lb injectors for cars with blowers or cars with performance intakes with upgraded heads. I am using my refurbished factory heads from the engine builder and the stock intake. So will the 24's be too much? Any suggestions
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 20, 2005
#2
  • Sep 20, 2005
  • #2
The 19 LB injectors are good to 300-320 flywheel HP. It takes some serious heads and intake to make that kind of HP. You won't get anywhere near that with what you currently have.
 
B

bigyet12

New Member
Sep 19, 2005
23
0
0
Sep 20, 2005
#3
  • Sep 20, 2005
  • #3
so the 24's would be overkill? Where do you set the bar for needing to upgrade your fuel pump? And for what I am doing with the minor upgrades, what alternator would be good for my car? I also heard that the BBK aluminum underdrive pullies used on the alternator don't allow the stock alternator to charge properly. Is there any backing for this theory?
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Sep 20, 2005
#4
  • Sep 20, 2005
  • #4
24s are not needed. You typically need to upgrade your fuel pump and injectors when you get a H/I/C combo of some sort or poweradder. Check out www.pa-performance.com for an alt. The 130 amp 3g is what I would recommend and a 4gauge wire upgrade(can piece that together yourself for cheaper than they sell). I had March U/D pullies with my stock alternator and at idle the voltage was hovering around 12v. Not so good so when I put in the electric fan I got the 3g and it idles around 14.5 volts with the pullies.
Kevin
 
You must log in or register to reply here.

Similar threads

K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
D
Tune erased/wont start/91 fox body
  • drew123
  • Jun 15, 2026
  • Digital Self-tuning Forum
Replies
2
Views
272
Digital Self-tuning Forum Aug 7, 2026
drew123
D
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
846
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
236
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?