Just the mounting tabs. That stuff I linked is industrial/commercial grade stuff.Plastic bumpers out of thin air!?!
Now thats a vote of confidence
will be trying this 'sex' one when the time comes....
Thought I'd bump your thread back up. What's up?
Thanks Enzio, thats mighty nice of ya.
There might be a little something extra in your Christmas stocking.
What's up?
I've been listening to the front brake pads go clackety-clack at low parking lot speeds.
I imagine this is because some idiot (ahem) mounted the line loc almost as high as the master cylinder.
Needed to keep it all going downhill.
So i ordered this 2lb Residual Pressure valve to add to the front and think it will solve the problem.
My left over piece of Stainless steel line is probably too short and I already killed the cheap-o brake flair ing tool doing the other stainless flairs.
It was not happy after about 3 uses.
At least the SS lines are cute to look at.
One yr old master cylinder is very rusty looking now. Why cant that be stainless too?
So bought and bent some stuff from local auto store.
Replacing line from master to proportioning block.
Should of bought fluid to though.
Will be installing soon.
Yup, RP Valve is in, just got to find some help to bleed it. The son has run off to beach, and not back yet.
MC got some love too. Its a lovely day at the beach.
View: https://youtu.be/E5Tu8gRqG5M
MC got some love too. Its a lovely day at the beach.
Whats the water temp.
80 degrees = Fricken Nice!
I was wondering what you used to pretty up the MC?
Wiped it down with thinner a couple of times, then
Chip brush and a can of 'rust barrier.' Well probably melt first time the fluid hits it.
I wanna goto Hawaii
They still telling everyone who comes has to do two week quarantine.
Most our money comes from the military and or tourists, were so phucked.
But when you do look me up for a drink ( angling for free booze )
Florida water temp 88 degrees. For those of you whom have never felt 88 degree ocean water. There is nothing like it for healing old bones.80 degrees = Fricken Nice!
Wiped it down with thinner a couple of times, then
Chip brush and a can of 'rust barrier.' Well probably melt first time the fluid hits it.
Time to pass the yearly safety inspection already.
The exhaust has been leaking since the moment the old water pump left us, may it RIP.
So up on the jack stands and we pulled the Y~ pipe out.
This manifold doughnut was the issue, I guess the coolant explosion killed it.
Missing some @ 12 o clock, can see divot.
Dont be laughing at my single soda straw exhaust pipe.
The exhaust has been leaking since the moment the old water pump left us, may it RIP.
So up on the jack stands and we pulled the Y~ pipe out.
This manifold doughnut was the issue, I guess the coolant explosion killed it.
Missing some @ 12 o clock, can see divot.
Dont be laughing at my single soda straw exhaust pipe.
Thought I might have to do manifolds too, but I think I'm ok.
2Blue2's two new blue gaskets too, whoo hoo!
man that was fun to say
2Blue2's two new blue gaskets too, whoo hoo!
man that was fun to say
Exhaust Y pipe is back in.
Now...
At full left hand steering lock, the passenger rim rubs, on the front of right upper A arm.
See shiny spot with rim shrapnel sitting next to it.
Ground that offending corner right the heck off, and then touched it up with a twig and my can of black rustoilem.
Spun tire by hand and I think I'm ok but have to drop it and drive it first 2B sure.
Now...
At full left hand steering lock, the passenger rim rubs, on the front of right upper A arm.
See shiny spot with rim shrapnel sitting next to it.
Ground that offending corner right the heck off, and then touched it up with a twig and my can of black rustoilem.
Spun tire by hand and I think I'm ok but have to drop it and drive it first 2B sure.
429MII
5 Year Member
Aw man..that video of gorgeous Hawaii is just not fair.
Will try to refrain from posting lovely senic pictures
Just rusty mutt2 stuff from now on.
Well after this