Blackhawkxx
Advanced Member
- Mar 3, 2023
- 466
- 462
- 73
351 Cleveland swapped MII
- Thread starter 78 Mach1
- Start date
Thank you. I hope so. The short story is I built a model of a Mustang II way back when I was in grade school. I custom built it out of parts from three different model car kits. Ever since then. It’s been my goal to build a real version of that model car. I’ve had this vision for the past 40 years. This cars build has been solely based on that model car I built so many years ago.
I have zero plans to make this a race car. More of a nice street car that has some of the race car appearance. But because I’m trying to replicate that model car, that’s what mandated the custom wheel tubs and frame rails. My ultimate goal is for it to still have good road manners even with all the race stuff.
I used a lot of sound deadening material on this car. Even the roof has sound deadening matting on it. That should make this car feel and sound very solid.
I have zero plans to make this a race car. More of a nice street car that has some of the race car appearance. But because I’m trying to replicate that model car, that’s what mandated the custom wheel tubs and frame rails. My ultimate goal is for it to still have good road manners even with all the race stuff.
I used a lot of sound deadening material on this car. Even the roof has sound deadening matting on it. That should make this car feel and sound very solid.
Inspection plate is done. Now just waiting for the manual steering rack.
Got the new manual steering rack. The one from Rockauto is a 4 turn lock to lock just in case anyone else is interested in getting one from them. It will most likely be after the Thanksgiving holiday before I can get this installed. We have a pretty big family shindig and all.
I also bought a Holley Blue electric fuel pump with regulator. I’ll be installing that as well. I’m nervous about running it deadheaded though. The regulator that came with it is a deadhead regulator as far as I can tell. So I’m seriously considering getting a different regulator and running a hard line return to the fuel cell. Anyone on here running a Holley blue deadheaded for street use?
Blackhawkxx
Advanced Member
- Mar 3, 2023
- 466
- 462
- 73
Yes, for many years without issue, that's what they are made to do to the best of my knowledge. The only thing I don't do is leave it running without the engine running.
Sounds good. I may try it that way. And if I don’t like it, I can always add a return later. Thank you for the response.
Got the power steering converted over to manual steering.
Before.
After
It cleaned up the engine bay by eliminating all the excess hoses. Also gave me a couple more inches of clearance. Which is really important for header fitment. The steering feels really good. I won’t have any issues with this being difficult to turn like I was originally worried about. I highly recommend this conversion for anyone who needs more space to r just wants to get rid of the leak probed power steering system. .
Before.
After
It cleaned up the engine bay by eliminating all the excess hoses. Also gave me a couple more inches of clearance. Which is really important for header fitment. The steering feels really good. I won’t have any issues with this being difficult to turn like I was originally worried about. I highly recommend this conversion for anyone who needs more space to r just wants to get rid of the leak probed power steering system. .
Blackhawkxx
Advanced Member
- Mar 3, 2023
- 466
- 462
- 73
A question, it looks like your heater core nipples extend through the firewall. On mine, it looks like the hoses go through the firewall with no clamps visible. So yes most of my hose is factory original and that worries me a little. I wonder why there is a difference?Got the power steering converted over to manual steering.
Before.
After
It cleaned up the engine bay by eliminating all the excess hoses. Also gave me a couple more inches of clearance. Which is really important for header fitment. The steering feels really good. I won’t have any issues with this being difficult to turn like I was originally worried about. I highly recommend this conversion for anyone who needs more space to r just wants to get rid of the leak probed power steering system. .
Very good question. Best guess I have is either my heater core or your heater core was replaced at some point. I’ll look at my 76 Cobra and see what it has to compare.
I think that's the difference between AC and non-AC HVAC boxes. 
As you can see, @Blackhawkxx has his blower motor sticking out into the engine bay, same as mine, so we don't have the AC connections as you do in your car. I had to run my hoses through the firewall too - which kinda sucks.
As you can see, @Blackhawkxx has his blower motor sticking out into the engine bay, same as mine, so we don't have the AC connections as you do in your car. I had to run my hoses through the firewall too - which kinda sucks.
The AC versus non AC may be the difference. My 1976 Cobra has the hoses going through the firewall.
My Cobra has the factory heater core delete option lol. But you can see the hoses did go through the firewall. It is a non AC car. My 78 is a factory AC car. Which I unfortunately won’t be using. But it’s there.
My Cobra has the factory heater core delete option lol. But you can see the hoses did go through the firewall. It is a non AC car. My 78 is a factory AC car. Which I unfortunately won’t be using. But it’s there.
That's what I thought when I still lived in Iowa and the reason my car now has no AC. I went through the trouble of removing everything AC related - now I wish I had it....
If you decide to lose it all, I'd be interested in taking it off your hands! I've been toying with the idea of finding a parts car with AC just to swap what I'd need - most specifically the air box and AC control switches. I figure once I have all of that it'd be pretty easy to retrofit a different compressor and run new lines.....
Blackhawkxx
Advanced Member
- Mar 3, 2023
- 466
- 462
- 73
That is most likely right. Not one of Fords better ideas. Thanks everyone.
I realize an AC delete is probably one of those most regrettable mods people do to their cars. Especially since my end goal is to be back in Texas in about 5 years. But unfortunately, the mods on this car have gone far beyond ever going back to factory AC. The only way I would ever do that is to return the car to a stock motor for daily driver duties. I’d just buy myself another cobra II before doing that.
I will not be using any of the factory AC stuff on this car. If you decide to try to go back to AC, I’m sure we can work something out.
Blackhawkxx
Advanced Member
- Mar 3, 2023
- 466
- 462
- 73
If I could ask, what size and brand of front tires do you have? I have BFG T/A Radials 155-80R-15 that are 24" tall on 4" wheels and they seem like there is too much weight on them even though I slightly over inflate. You now have a heavier engine than me and your tires don't look that way.
Similar threads
