• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

4:10 or 4:30????

  • Thread starter Thread starter tama
  • Start date Start date Mar 12, 2004
T

tama

New Member
Dec 27, 2003
75
0
0
San Jose, CA
Mar 12, 2004
#1
  • Mar 12, 2004
  • #1
Which is better on a 98 cobra, how are at the track for a 1/4 mile run, how hard are they to hook, and do they affect top end, How do you guys like them on the streets and are they good from say a 40mph roll???? I was told 3:73 where the ideal gear but I'm thinking of going a bit higher for now.
 
9

99SVTAddict

New Member
May 8, 2003
613
0
0
Clinton Twp, MI
Mar 12, 2004
#2
  • Mar 12, 2004
  • #2
I was told 3:73 where the ideal gear
Click to expand...


What tool told you that. Might as well stay with the stock gearing then.
4.10's minimum. Fun street gear, but you end up shifting right at the end of the 1/4 mile so not so great for the track. I had 4.10's.

4.30 gear are a lot of fun...really wakes the car up. 1st gear will go up in smoke if you don't at least have a drag radial. I had the 4.30's installed right before I stored it for the winter, but the short amount of time I got to drive the car it was fun on the street....and I have a blower. Still, every gear is usable except first. I just upgraded to a 295 BFG drag radial for the street though and will be trying an ET Street at the track this spring.

4.10 MINIMUM.
 
R

rays1999cobra

Founding Member
Oct 2, 2002
129
0
0
Irving, TX
Mar 12, 2004
#3
  • Mar 12, 2004
  • #3
99SVTAddict always gets to these posts before me and always gives excellent advice. 4.10s minimum. I installed 4.10s thinking they would be too much and frankly they are not enough. 4.10s are a lot of fun though. I'd recommend 4.30s.
 
T

tama

New Member
Dec 27, 2003
75
0
0
San Jose, CA
Mar 12, 2004
#4
  • Mar 12, 2004
  • #4
Quote:
I was told 3:73 where the ideal gear


I won't say what mustang specialist told me that but I will say they are highly repsected amony mustang owners in my area but I was told them that they are the ideal gear for racing and for everyday use and that they get great respones by people that went with that gear ratio. Now that my car is no longer an everyday driver I want to go with something more aggressive but I also heard that up top the cobra will also lose power. Is this true or just people fearing the gears????
 
C

cob99

New Member
Nov 29, 2003
56
0
0
bensenville illionis
Mar 12, 2004
#5
  • Mar 12, 2004
  • #5
dud no way bro i have 456 in my 99 cobra and i walked away from a z06 vette so thats all i have to say !!! but it takes pratice to launch on theses gears i can chirp 5th gear it took me about a week to master the launch , wen driving normal i just start out in 3rd then right to 5th i also get like 23 24 on highway and 18 19 city i love the gear , like everybody said dont fear the gear in a cobra peace bro
 
9

99SVTAddict

New Member
May 8, 2003
613
0
0
Clinton Twp, MI
Mar 12, 2004
#6
  • Mar 12, 2004
  • #6
99SVTAddict always gets to these posts before me
Click to expand...


Go 4.30's....easy as that. You may need to go with an aluminum driveshaft to eliminate any vibe as a result of the gears...things are spinning a lot faster so the vibe is a common result. I have a custom aluminum DS and have 0 vibe at any speed.

You will just need some sticky tires...unless you like to do smoke shows.
Without good tires, don't bother with the gears.

 
T

tama

New Member
Dec 27, 2003
75
0
0
San Jose, CA
Mar 12, 2004
#7
  • Mar 12, 2004
  • #7
can somebody post pictures of the tires they are running with these gears and tell me how they hook or handle?????
 

BadMoFo

I will sleep with a Mod for a CT
Founding Member
Sep 28, 2001
2,911
0
0
New Bern NC
Mar 12, 2004
#8
  • Mar 12, 2004
  • #8
go 4.30's wish I had.
 

9COBRA7

Founding Member
Jul 16, 2002
116
0
0
Just outside Detroit MI
Mar 12, 2004
#9
  • Mar 12, 2004
  • #9
Everyone tells me different things all the time makes me worried about even putting a gear in. Some say if you do the gears, you should get better axles, and then a stronger tranny. But then on here it seems like no one has a prob, and I keep thinking 4:30's sound fun..
 

DirtySanchez

Founding Member
Apr 18, 2002
331
0
0
Atlanta, GA
Mar 12, 2004
#10
  • Mar 12, 2004
  • #10
tama said:
Which is better on a 98 cobra, how are at the track for a 1/4 mile run, how hard are they to hook, and do they affect top end, How do you guys like them on the streets and are they good from say a 40mph roll???? I was told 3:73 where the ideal gear but I'm thinking of going a bit higher for now.
Click to expand...

I think I'm going to replace myself with a robot that posts this URL in response to every thread with the word "gears" in it: http://www.svtoa-atlanta.org/cgi-bin/trans.cgi


rays1999cobra said:
99SVTAddict always gets to these posts before me and always gives excellent advice.
Click to expand...

Haha, I think 99SVTAddict is ready for a robot too. We'll write a 99SVTAddict simulator that tells everyone who posts that they need 4.30's and a T56.
 

Jim Vaccaro

Founding Member
Jan 28, 2000
1,104
0
36
Brooklyn
Mar 12, 2004
#11
  • Mar 12, 2004
  • #11
I made mistake useing 373's 430's are the way to go...
Don't Fear the Gear!!
 
F

fiveofanatic

How to fuel a Mustang:
Founding Member
Aug 12, 1998
8,152
0
76
Phoenix, AZ suburbs
Mar 12, 2004
#12
  • Mar 12, 2004
  • #12
tama said:
Quote:
I was told 3:73 where the ideal gear


I won't say what mustang specialist told me that but I will say they are highly repsected amony mustang owners in my area but I was told them that they are the ideal gear for racing and for everyday use and that they get great respones by people that went with that gear ratio. Now that my car is no longer an everyday driver I want to go with something more aggressive but I also heard that up top the cobra will also lose power. Is this true or just people fearing the gears????
Click to expand...
Since Charlie is no longer around, it had to be Apex.

They're right, for a nice, well-mannered street car, especially if you're more road-race oriented than drag racing, as Charlie's was, & Apex is. Most drag guys are more willing to accept the drivability compromise & run a short gear. Once I get off my ass & get gears in my '97, I'll go 4.30's.
 
9

97SVTsnail

New Member
Jan 27, 2004
40
0
0
Mar 22, 2004
#13
  • Mar 22, 2004
  • #13
I am in the same boat. I am still stock right now and I'm tring decide between 4.30 and 4.56's. My best 60 ft's are 1.99 hooking on et streets at a 4000 rpm launch. What short times are you guy's getting with 4.30's and what are your rpms at 60mph?
 
You must log in or register to reply here.

Similar threads

M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
507
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
74
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
656
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
O
Progress Thread LTD-ing
  • OX1
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
324
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 6, 2026
OX1
O
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?