92 lx 4cyl swap to 95 parts

hello fellas!

first off, i am from the 94-95 section and i dont know much about the foxes. ive searched and searched and got different answers(both here and google in general) so i figured this was the best place to ask... mods if this is in the wrong section, please move

i had just a few questions if you all dont mind answering for me or sharing some knowledge!

anyway, here goes the questions!

i have a 92lx notch. its a 4cyl auto. i currently have a stock 95 gt that will be getting a somewhat of a overhaul hopefully this winter with a TFS top end w/ a CHP 306 bottom end, beefed up AODE and if i can get my hands on one, a new edge rear end...

my question is... if i drop in the notch my current stock 5.0 motor from my 95, what will i need to make the motor run in the notch?

also will my AODE work in the car? if not will an AOD from a 91 gt bolt up to a 95 5.0? and how about the rear end? brake set up? sorry for all the questions!!

any help would be GREATLY appreciated guys! thank you in advance in everyone that does.

:SNSign:

thats why id be taking my motor out and putting in the notch... would i need a certain wiring harness out of a 92 gt or 95 gt? same with computer?

So would it be safe to say that if I put a 95 5.0 in the LX, I can use a 92 gt wiring harness and 92 cpu with a 91 gt aod and everything will run fine? Thanks for your help guys!
Posted via Mobile Device