? about sn95 spindles on fox

[TT91]

when using sn95 spindles on a fox, is it neccassary to use 94+ struts? I just heard of someone doing it, and his current struts wont reach the holes in the spindles. Anyone know?Thanks'

Mike

 

[DropTopR]

stock struts shoulld be okey dokey, or at least that's what I've heard.

 

[TT91]

Thanks for the help,iv actually had alot of help on this topic since posting the thread. Yes they will fit fine. THANKS AGAIN! later
mike

 

[stang_380]

i did the whole 5 lug conversion and used 95 spindles same as 94 and every thing bolted right back on. if you have any questions im sure i can help.

 

[TT91]

Im looking for help from anyone, all the time, but mores specifically,anyone who has installed the Baer M2300K Killer kit. Thanks, Ill let u know if anything comes up.
Mike

 

[91BlckGT]

Im looking for help from anyone, all the time, but mores specifically,anyone who has installed the Baer M2300K Killer kit. Thanks, Ill let u know if anything comes up.
Mike

I've not installed the Cobra killer kit, as I decided to piece together my own kit based on the Baer track rears, and Brembo 4-piston fronts. I'm done with everything but putting on the actual brembo brakes at this point (and that's an easy, straightforward step) so if you have questions, I can help out on the other stuff.

 

[TT91]

Thanks!!! And here I thought all the moderators did was cruise around locking up threads..Appreciate the help, see ya
mike