I noticed the outter part of my tire wearing down so i went to get an alignment. it was not pulling before the alignment. after it got done its pulling to the left. the specs are as follows:
LF/RF
camber -.7/-.7
caster 3.0/3.4
toe .15/.13
total toe .21
thrust angle .03
LR/RR
camber -.1/-.3
toe .15/.06
total toe .21
thrust angle .04
I asked why the difference and he said it was a ford thing. I work on my jeep. the stang is the wifes. would those numbers cause it to pull left and need to go back?
LF/RF
camber -.7/-.7
caster 3.0/3.4
toe .15/.13
total toe .21
thrust angle .03
LR/RR
camber -.1/-.3
toe .15/.06
total toe .21
thrust angle .04
I asked why the difference and he said it was a ford thing. I work on my jeep. the stang is the wifes. would those numbers cause it to pull left and need to go back?
