• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Am I gonna like Flowmaster Delta 40's?

  • Thread starter Thread starter jcode68
  • Start date Start date Jun 6, 2006

jcode68

Active Member
Jul 15, 2003
892
1
29
Massachussetts
Jun 6, 2006
#1
  • Jun 6, 2006
  • #1
I just made the appointment for my 68 to go into the exhaust shop on Thursday to receive 2.5" dual exhaust from the headers back using Flowmaster Delta 40's. My combo is new 347, Hooker full length competition headers and T5 manual trans (other detaisl in my sig). Like everyone else, I want the best of both worlds I want to keep the performance high and have that awesome performance sound, I'm just hoping I will nto regret my decision because it's too loud for normal driving. It's not a daily driver, but I do want to be abel to cruise while listening to the radio. Anyone running similar setup? Regrets or are you happy?
 

red65

Member
Apr 12, 2003
411
0
17
Ann Arbor, MI
Jun 6, 2006
#2
  • Jun 6, 2006
  • #2
I ran 2-1/2" Delta 40's at first on my '65 (306EFI before the supercharger) and found my teeth rattling and small children in my neighborhood running terrified to their mothers when I drove by. It was not exactly subdued. The drone at 2K rpm was enough to make it hard to focus (exaggerating a little, but only a little). I swapped them within about 2-weeks for Dynomax turbos and am much happier with them. It all depends on your tastes - mine tend toward avoiding hearing loss and irking all of my neighbors...
 

DK832

New Member
Apr 11, 2006
291
0
0
Copenhagen, DK
Jun 6, 2006
#3
  • Jun 6, 2006
  • #3
I second that. Call the mufler shop and get either Flowmaster 50 Series or even better the Dynomax. Both will not transmit sound thru the bottom of the car like the older 40 Series will. My Magnaflows are loud enough when I step on it (but behind the car, not under) and quiet enough for cruising with the mrs and kids onboard.
 

SoCalCruising

Founding Member
Jul 25, 2000
2,437
0
47
SoCal
Jun 6, 2006
#4
  • Jun 6, 2006
  • #4
I have 50s and they are plenty loud - I set off alarms if I rev near one of those ricers I would not want anything louder.
 

jcode68

Active Member
Jul 15, 2003
892
1
29
Massachussetts
Jun 6, 2006
#5
  • Jun 6, 2006
  • #5
Thanks, I was thinking the 40's would be too loud once the newness of them wore off. I am going to go with the 50's. Description from their website:
<TABLE height=130 cellSpacing=0 cellPadding=5 width="100%" border=0><TBODY><TR><TD bgColor=#3f3f3f height=24>50 Series Delta Flow - Three Chamber Mufflers </TD></TR><TR><TD class=discription>This is the latest design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an "H-Chamber" to eliminate most all interior resonance and still have that famous Flowmaster sound outside the vehicle. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability. </TD></TR></TBODY></TABLE>

Sounds more like what I am looking for.
 

302 coupe

Founding Member
Mar 2, 2000
1,952
3
36
Macon, Ga.
Jun 6, 2006
#6
  • Jun 6, 2006
  • #6
I cast my vote for Hooker Aerochamber's, my new favorite muffler. Very hi flow, great tone, virtually no resonance.
 

red65

Member
Apr 12, 2003
411
0
17
Ann Arbor, MI
Jun 6, 2006
#7
  • Jun 6, 2006
  • #7
jcode68 said:
This is the latest design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an "H-Chamber" to eliminate most all interior resonance and still have that famous Flowmaster sound outside the vehicle. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability. </TD></TR></TBODY></TABLE>
Click to expand...

I was thinking the same thing prior to swapping out my Delta 40's, but they only make the 50 series with a longer muffler body - made it a pain to fit into the existing space left by the 40-series. There was a Dynomax of the correct length, fortunately. Might not be an issue for you, but you might want to check...
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
Jun 6, 2006
#8
  • Jun 6, 2006
  • #8
You'll be happy with the 50's. I have the 40's and get headaches from the resonance. I have a BIG stereo system and to hear it I have to turn it up so loud my ears bleed!

My mom just got 50s on her 68 and they sound the same on the outside (just as mean) but the inside is quieter and NO RESONANCE!
 

stangman67

Member
Feb 8, 2003
294
0
17
connecticut
Jun 6, 2006
#9
  • Jun 6, 2006
  • #9
Possibly Magnaflow universal 2.5" mufflers? I put these in place of 40s and like the sound much more. Sounds different than that tone a flowmaster makes every v8 sound like
 

4MuscleMachines

Member
Jul 20, 2005
417
1
17
South Texas
Jun 6, 2006
#10
  • Jun 6, 2006
  • #10
I tried all the Flowmasters and ended up with the Super 40's. Much less resonance/drone than the Delta Flows, to the point I believe it's non-existant. They are my favorite on small blocks.

The sound is quieter but still sound mean and cackling, just right IMO. Try them, you'll like them.
 

jcode68

Active Member
Jul 15, 2003
892
1
29
Massachussetts
Jun 6, 2006
#11
  • Jun 6, 2006
  • #11
I appreciate all the input and opinions. I decided to go with Flowmaster 50's with H pipe etc 2.5" I like the sound of Flowmaster, just didn't want it to be too obnoxious and overpowering in the interior. Hopefully I'll be happy, will know Thursday afternoon!
 
You must log in or register to reply here.

Similar threads

T
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
242
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
854
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
W
How much HP/Torque have I added with these parts?
  • Walker410
  • Aug 29, 2021
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
961
1965 - 1973 Classic Mustangs -General/Talk- Aug 30, 2021
Noobz347
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?