Am I wasting my time or???

5ohMustang · Apr 7, 2004

I have TFS Heads, GT40/Explorer Intake, 24lbs injectors, 73mm MAF, 70mm TB, comp cam 1.7 RR, and MAC LT Headers that I haven't installed on my car yet. I'm still waiting to order the cam, O/R h-pipe, and a couple other parts. I was thinking about putting the intake, fuel injectors, TB, and MAF on this weekend though. I realize I'll have to take off the intake again once I put the heads and cam in, but would doing this ruin the new gaskets I'll be using for the intake? I would really like to do this as I won't be able to do the rest of the parts for at least another month.
Thanks,
Brian

muddslide · Apr 7, 2004

It's better safe then sorry, always buy new gaskets. think of putting it together, starting it and then finding a leak on the old gasket. My opinion, its worth the 20.00 dollars

b1gp1mp1n247 · Apr 7, 2004

i took my intake off to clean it up and re-used the gaskets. no problems. when you take off the intake check the gaskets if they look ok then use them. i did buy a spare gasket just in case. its nice to have anyway. id put the parts on and do heads and cam later. why wait? the day i get a part it goes on that day

65ShelbyClone · Apr 8, 2004

5ohMustang said:
but would doing this ruin the new gaskets I'll be using for the intake?

Yes, it will wreck them. Gaskets are one-time use. Even if they were reusable, I wouldnt want to go through all that work twice if I didnt need to. Just wait, a month isnt long.

Am I wasting my time or???

5ohMustang

muddslide

New Member

b1gp1mp1n247

New Member

65ShelbyClone

Similar threads

Am I wasting my time or???

5ohMustang

muddslide

New Member

b1gp1mp1n247

New Member

65ShelbyClone

Similar threads

Privacy & Transparency

Privacy & Transparency